Changing tyre size???
#1
#3
RE: Changing tyre size???
I'm not really that fussed on what particular size I use. Its just that my rear tyre is basically down to canvas now & I am really low on $$ at the moment & cant afford the price of a new tyre. But a guy has offered me his spare tyre which isa Shinko Advance-005 190/50 for $50 & it has about 85% tread left.
Dan
Dan
#5
#6
RE: Changing tyre size???
I'm not a hard rider. I never push the bike. I like taking it easy &touring. My wife comes along most of the time & theres about 200kgms (440lbs) between us. So just want something that will be comfortable enough with both my wife & myself out touring. If yous think that the 190 would be too wide then i'll have to just wait & save. Will go have a closer look at the rear tyre today & see what clearance it has both sides.
Dan
Dan
#7
RE: Changing tyre size???
Ok, Had a close look at the current back tyre which is a 170/60/17 & there is about a 10mm space between the side of the tyre & the chain. So if I got a 190 it would just touch the chain. Some one said that you can trim the side a little but dont like the sound of that.
The same guy that offered me the 190 said he also has a 160/60/17 I can have. Would this be too skinny?
Dan
The same guy that offered me the 190 said he also has a 160/60/17 I can have. Would this be too skinny?
Dan
#9
RE: Changing tyre size???
Think about the fact that it is you and your wife on the bike. Changing the tire size would make me feel uncomfortable, but I really can't say for sure. I would consider checking your local trader mag and here until you find the properly sized tire. Also, call a local dealer with your question, they should have some excellent insight. Good luck.
#10
RE: Changing tyre size???
Excuse me if i'm being ignorant and someone has answered this but its the last question i read before i need to go out. Quick answer unless already stated is, bigger tyre on the rear slower turn in on the rear, which means the front may turn in quicker and fold. Imagine front wheel breaking in the wet. Stick with the size the manufacturer designed it with.