Please help, I have made it all the way to have access to the sparkplugs, but know I am stuck. It says to disconnect the direct ignition coil connectors then remove the direct ignition coils from the spark plugs. I cannot find a way to release the clip on the ignition coil and the assembly does not seem to want to come off either.

Thank you in advance for any help

 

Look a little harder, the clip is there, then just unclip them and move the wires out of the way. If the coil packs themselves arent coming off well, give them a quarter turn or so to free them up, then twist and lift and they should pop out.

 

Just checking, I am trying to disconnect the white clip from the black top I can see some black tabs recessed. Sorry for the stupid question.

 

Not a stupid ? and i have been trying to find my pic of the coils to show ya but i cant find it [:@].

 

Anyhow just press down on the clip and it should release. Then do the turn the coil thing to free that up to lift out.

 

got it
thanks for your help, my first DIY project was not going very well

 

your lucky its a honda and not a zx-10 you can barley get your hand in there let alone get the plugs out