I have an 01' f4I and I was wondering if anyone had any ideas where to get some swing arm extensions. I am also looking for sprockets and a longer chain. I have no idea where to get aftermarket parts for these things. Somebody want to help me out?

 

dont do it :P

 

i have wondered the same thing i have a friend with a streched gsxr 1000 and it hauls *** but our f4i's dont come up unless they are modded so unless u drag its probably not worth it because it kills its handleing and also no more wheelies which i would have a problem with

 

Well I want to keep the front end down when I gear this thing. I am tring to keep up with the bigger bikes but I'm getting smoked off the line. I want to go up 2 in the rear sprocket, extend the swingarm and get some cams... I just dont know where to get them............

 

you will not be able to keep up with liters in a straight line no matter what you do......

strech ur bike and it will become useless at handling.

 

Ok, lets say I don't stretch it, what about cams and sprockets? Where can I get those, and what kind am I looking for?

 

www.sprocketcenter.com

try that. real good website.

 

heh his first posts are how to streach his f4i looks like he bought the wrong bike if he wants to squid out go get a suzuki

 

your 01 F4i is not going to keep up with a 1000 in a drag race unless you spend around $10k on it and most likley not even then.
I have never seen the point of stretching a 600 unless its solely a drag racing bike (with extensive modifications for that purpose). I know not everybody likes doing trackdays and cornering like I do but mods like this that make a 600 almost useless at anything but drag racing, which a 600 is not even good at or intended for in the first place just seems a bit strange to me. Personally I like to keep my motorcycles as "well rounded" as possible. IMO you never know what you might wind up doing with a bike but if you extend the swingarm your pretty much ONLY going to be doing drag racing and straight line riding when your on a 600?

I don't have a problem with drag racing, there are a lot of people that enjoy it but why use a 600 if your not racing professionally and competing in an actual 600 class? Drag racing is the one form of motorcycling that it seems to me having a 1000+ cc bike is a no-brainer and likeI said, trying to compete against 1000s on an older 600 is a waste of time anyway.

 

^+1 i just think when u cant do all the stuff u can on ur toys it becomes worthless because if u want to hit the track with-1 in fron and +2 in back u can still run pretty fast unless u have been doing this a while -1+2 will take u for a good ride my sugestion is get some gears and some mods i.e PC3 full exhaust and airfilter then stick with that i think that should satisfy your need for speed