F4i - Main Forum Main F4i discussion board

Neutral to 1st

Thread Tools
 
Search this Thread
 
  #1  
Old 06-22-2008, 09:08 AM
CBR Time's Avatar
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Ottawa / Gatineau Canada
Posts: 673
Likes: 0
Received 0 Likes on 0 Posts
Default Neutral to 1st

Ok this has happend only once or twice? im in N waiting at a light etc, try to engage 1st and she wont go? end up leaving in 2nd, anything to be concerend about here? again its only happened on very rare occasions, but thought id ask anyway. 2002 w 10200K's
Cheers
 
  #2  
Old 06-22-2008, 09:41 AM
sluijs01's Avatar
Senior Member
Join Date: Oct 2007
Location: Ohio
Posts: 195
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

It's probably just the way the gears are laying since we have sequential gearboxes. Walking the bike even half a foot forward or back should allow you to drop into first. I typically make sure I'm in first just before I stop anyways, but every so often I decide neutral is necessary at an exceptionally long light
 
  #3  
Old 06-22-2008, 10:02 AM
CBR Time's Avatar
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Ottawa / Gatineau Canada
Posts: 673
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

nice, thxs, ya same here, most often in 1st
 
  #4  
Old 06-22-2008, 10:39 AM
CBR Time's Avatar
Senior Member
Thread Starter
Join Date: Dec 2007
Location: Ottawa / Gatineau Canada
Posts: 673
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

btw nice color, lol same year same color go figure
 
  #5  
Old 06-22-2008, 01:00 PM
reaper2022's Avatar
Senior Member
Join Date: Aug 2007
Location: Lexington KY
Posts: 634
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

I was wondering about this, too... I noticed it happening to me lately... I was worried my occasional clutchless upshifts were messing with the gears lol... but then again, I use the clutch for 1st and 2nd.
 
  #6  
Old 06-22-2008, 01:25 PM
RojerLockless's Avatar
Retired Moderator & The Big Deal
Join Date: Jul 2005
Location: Houston TEXAS
Posts: 2,596
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

when this happens rock the bike forward then back an inch or two while putting the bike into gear, it should work if that doesn't then slip the clutch out an inch or two then back kinda let it out then in ish you'll get used to it, it happens every so often nothing to get worried over
 
  #7  
Old 06-22-2008, 02:13 PM
Join Date: Oct 2007
Location:
Posts: 212
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

shift with authority! if your not already...
 
  #8  
Old 06-22-2008, 03:52 PM
Wants a CBR's Avatar
Senior Member
Join Date: Apr 2008
Location: Racine,WI
Posts: 334
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

If you're in say 5th or 6th come to a stop and thentry to go down through the gears it becomes hard to get into first. I learned that the hard way, from now on I go through the gears as I'm coming to a stop.
 
  #9  
Old 06-22-2008, 05:57 PM
Join Date: May 2008
Location:
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

I have noticed this from time to time. All I do is let the out a little bit why in Neutral and then pull it back in again then it goes in fine.
 
  #10  
Old 06-22-2008, 07:44 PM
FFCBRf4i's Avatar
Senior Member
Join Date: Aug 2006
Location: Los Angeles, CA
Posts: 1,588
Likes: 0
Received 0 Likes on 0 Posts
Default RE: Neutral to 1st

I have to admit that I've been experiencing a similar problem. I would be at a stop light and in first gear. Then I try to shift into neutral, so that I can rest my hands, but it wouldn't shift. The lever seems sooo stubborn. It wouldn't shift to neutral from first. I tried rolling the bike back and forth, but it didn't work. It didn't happen before either. I would be able to roll the bike and it would click right into neutral, but now it seems like it's more stubborn to shift.
 


Quick Reply: Neutral to 1st



All times are GMT -5. The time now is 01:21 PM.