Intro: Bakerbuilt Garage/ First Bike
 

Ive been working on Honda's and Acura's for some time now, building some absolute beasts. I finally convinced the wife to let me get a bike! I figured I'm still building my car ( 01 S2000) so I wanted something to enjoy in the meantime. I'm currently in the Navy ( active) witha little over 5 years in. I get out in September, my rate is MA (Military Police). A coworker mentioned he had a bike he'd be interested in selling, I ran it by the wife and got the green light so here we are. Its an 04 F4i with 20k miles. The guy that had it did nothing but change the oil, but he barely rode it. SO me being the kind of person I am got to work on all the maintenence that had been neglected. This is the first bike I have worked on or owned but I'm pretty damn mechanically inclined. Ill attach pictures of work I've done on a few cars as well.
First things first, WhatI have done so far:
Oil/Filter change ( Mobil 1, K&N)
Cleaned the piss out of the chain and bike
Lubed the chain
Lubed the clutch and throttle cables
Brake pads front and rear EBC Front/Galfer Rear (Both Sintered)
Replaced the broken front mirrors
Flushed front and rear Brake fluid
Changed spark plugs
Installed Ram phone holder
Fuel system cleaner

To do/ Parts ordered list:
Change rear taillight( from Ebay to Motodynamic Integrated LED)
Shorty levers
Flush coolant/ change thermostat
Install lower Temp Fan switch
Install LED's into passenger footpegs (Running,Brake and Signal)
Install HID headlights (High and low beam)
Install gear shift indicator ( I dont know why, I just wanted it)
Install K&N air filter

Future mods:
Paint fairings and tank (not a huge fan of yellow)
Ditch the seat for a split seat( my wife likes riding and wants a small backrest so I'll fab something up)



With that being said if there is anything maintenence wise i missed feel free to chime in!

On to the pics:

Attachment 26927
Attachment 26928
Attachment 26929

Fairing Damage
Attachment 26930
Attachment 26931

Maintenence
Attachment 26932
Attachment 26933
Attachment 26934
Attachment 26935

Other Cars I've Built/Worked on:
My old 600hp Civic I built/painted bay ect.
Attachment 26891
Attachment 26892
Attachment 26893
My Current DD ( when I'm not on the bike)
Attachment 26894
An Integra Type R I did a complete Engine/trans rebuild on:
[IMG]http://i30.photobucket.com/albums/c302/NewCb7Tuner/Mobile%20Uploads/IMG_0517_[IMG]
http://i30.photobucket.com/albums/c3...psspwqim4b.jpg
Attachment 26895
My Project car (800+ whp S2000)
Attachment 26896
Attachment 26897
Shaved and painted the bay:
Attachment 26898
K24 Integra I painted the bay on and built:
before and after
Attachment 26899
Wiring on the swap
Attachment 26900
Attachment 26901
Attachment 26902
Same car after I painted the bay
Attachment 26903
Attachment 26904
Other misc cars I've worked on/Wired/Painted/Built Ect.
Attachment 26905
Attachment 26906
Attachment 26907
Attachment 26908
Attachment 26909
Attachment 26910
Attachment 26911
Attachment 26912
Attachment 26913
Attachment 26914
Attachment 26915
Attachment 26916
Attachment 26917

Pretty cool stuff there.

Only thing I'd add to it is to check your valve clearances.

Are you sure he could handle that? ;)

I don't know, its seems intimidating.....:icon_lolsign:

It couldn't be any harder then a timing belt on an Acura NSX, or a Charge,Inlet pipe, Intercooler, Fuel pump an Fuel injector Install on an R35 GTR. Those were pretty time comsuming jobs the first time. lol

Wait, you wanna change out one of the best 2up seats ever installed on a sportbike?