how much is it to install HID lights or whats the install hard or easy

 

I found it to be pretty easy was done in about 2 hours and thats while drinking

 

kit 100 bucks, fairly easy, did in about 2 hours in the dark.

 

Not hard at all i would suggest getting the slim ballast they are really easy to find spot for. Did friends r6 in about 1 hour.

 

if you take your bike apart enough you could probably do it under 30 minutes

 

dont get the slim ballasts, they are weaker in the out-put. Get the regular ballasts, tape them together in a stack after you plug-in the bulbs, and stick them in the open pocket at the bottom of the nose/front fairing with some two-way tape (mine came with some). It's a lot easier if you take the front fairing off and do it. Took my about 1.5 hours.

 

Hey ice did u have regular and slim? Is your comparision from experience? Whats your reference point on the regular vs slim?

 

I could have swore that Blue Fox said it a while back on here, but I have a friend who bought them and I have the regular ballasts. We both got the same temp, and mines a bit brighter. Of course, it could be the just the two different bikes as his is an '07 RR. Just my opinion on them I guess.

 

I was curious is all, I don't have the ballasts in my bike and was looking at doing something to brighten it up.

 

The slim ballasts can vary from company to company but the ones I use (and any quality slim ballast) have the same output as the bigger ones. The bigger ones pull more power though, gotta love the beauty of efficiency.