F4i - Main Forum Main F4i discussion board

HELP...with a new Exhaust

Thread Tools
 
Search this Thread
 
Old Sep 8, 2006 | 12:34 AM
  #1  
Advert25's Avatar
Thread Starter
Joined: Nov 2005
Posts: 129
Likes: 0
From: RSM, CA
Default HELP...with a new Exhaust

Ok guys/gals... Im going to buy a new slip on Exhaust. I have a 2001 F4i pretty much stock..But Im in the process of painting (race replica) and adding new little things to the whole bike. Well the exhaust is next. I have already seen that thread with the 50 different exhaust companies with the Rev/Dyno run sound clips... I made it through about 15 of them before they all started to sound the same. Im looking for something pretty much in between a D&D and Yosh.. something right in the middle of that. I was thinking maybe a Devil??? Im asking all you F4i owners because your the ones that have them on your bikes and hear them everyday. So give me your opinion.... thanks in advance!!!!!!!!

My Budget: $600.00
Has to be a High Mount

other than that Im pretty open to suggestions

Thanks Everyone

Drew
 
Reply
Old Sep 8, 2006 | 12:50 AM
  #2  
stevolution's Avatar
Joined: Sep 2006
Posts: 5
Likes: 0
Default RE: HELP...with a new Exhaust

As far as the highmount issue goes, I know yosh does NOT offer a high mount. You can use the midpipe from the 2Bros exhaust to convert it to a highmount though. D&D and Yosh are on complete opposite ends of the sound spectrum IMO. Sounds like you want a loud yosh pipe... you can always cut it down a few inches, and it'll be a bit louder =)
 
Reply
Old Sep 8, 2006 | 01:34 AM
  #3  
Blackdog F4i's Avatar
Joined: Jul 2006
Posts: 874
Likes: 0
From:
Default RE: HELP...with a new Exhaust

Devil Shotgun all the way!!!!



MSRP is $699 but I am sure you could get it cheaper than that.

I have a Scorpion high mount and love it. Perfect tone for me. Not too loud in the lower revs. Low tone. Lots of noise when you open it up to 10K.
 
Reply
Old Sep 8, 2006 | 01:47 AM
  #4  
Tahoe SC's Avatar
Senior Member
Joined: Aug 2005
Posts: 5,917
Likes: 1
Default RE: HELP...with a new Exhaust

you can bust a yosh race mount...
also, maybe two brothers or jardine slip on will sound between them
 
Reply
Old Sep 8, 2006 | 02:15 AM
  #5  
Advert25's Avatar
Thread Starter
Joined: Nov 2005
Posts: 129
Likes: 0
From: RSM, CA
Default RE: HELP...with a new Exhaust

Thanks guys. That Devil Shotgun looks nice!!! I will also look into the Yosh race mount and the Jardine...

thanks again
 
Reply
Old Sep 8, 2006 | 12:48 PM
  #6  
Advert25's Avatar
Thread Starter
Joined: Nov 2005
Posts: 129
Likes: 0
From: RSM, CA
Default RE: HELP...with a new Exhaust

Ok looks like im going with either the Two Brothers M2 - Titanium High Mount, or M5 Carbon Fiber High Mount......... hope I like em' cool thing is the Main Two Brothers office is about 15 min from my house, I can walk in and pick it up today
 
Reply
Old Sep 8, 2006 | 01:25 PM
  #7  
bls5782's Avatar
Joined: Aug 2005
Posts: 37
Likes: 0
From:
Default RE: HELP...with a new Exhaust

I used to have a D&D pipe.....toooooooo loud, when I went through tunnels my riding buddies said it sounded like I was in their helmet, and all of the cars would hit their brakes and slow down. (I admit... It was kinda fun) switched to a 2 bros. and found it very nice. Still loud, but not ear bursting, and it will qiuet down when needed. If weight were an issue I would have reconsidered the 2 bros. It's probably twice as heavy as the D&D pipe.
 
Reply
Old Sep 8, 2006 | 02:43 PM
  #8  
ninetyfivehp's Avatar
Joined: May 2006
Posts: 800
Likes: 0
From:
Default RE: HELP...with a new Exhaust

i want a two bro's, jardine, or M4[sm=drooldude.gif]
 
Reply
Old Sep 8, 2006 | 02:49 PM
  #9  
Blackdog F4i's Avatar
Joined: Jul 2006
Posts: 874
Likes: 0
From:
Default RE: HELP...with a new Exhaust

Go with the Two Bros M5.

That thing is sweet looking.
 
Reply
Old Sep 8, 2006 | 04:41 PM
  #10  
FastCRX's Avatar
Senior Member
Joined: Jun 2006
Posts: 298
Likes: 0
Default RE: HELP...with a new Exhaust

Yoshi TRS Just installed today on a 06 f4i. Sweet grumble and F1 like scream at high rpms.
 
Reply



All times are GMT -5. The time now is 03:57 AM.