F4i Wont start after paintjob
#1
F4i Wont start after paintjob
When I took it apart bike ran fine, Sat outside for a month (covered-ish) while painting. Wont start now. Headlight harness is plugged in, Sensors facing up. It cranks but just wont start. Im baffled lol. tried searching and checked what people were saying to check (headlight harness, sensor, Etc.) I think it may be something more than that, Any ideas?
#4
Check your fuses, connections, and those typical electrical system stuff.
#5
#7
Took the fuel pump out, looked rusty in the filter? (sound right?) Mechanics arent my thing, Im more into AutoBody, Got the fuel pump out, My buddy did something to it that got it to turn on, but said that it didnt sound right. Im assuming at this point I should just order a new fuel pump assembly.
#8
check the plug on the bank angle sensor. It looks like a relay and is bolted to the top of your headlight. If you've had the nose fairing off you'll have had to disconnect it. Mine won't prime without it plugged in. Also check stuff like the fuel cut off switch and side stand kill switch etc
#9