F4i - Main Forum Main F4i discussion board

Clutch cable

Thread Tools
 
Search this Thread
 
Old Oct 12, 2007 | 01:44 PM
  #1  
mlrtime99's Avatar
Thread Starter
Joined: Oct 2007
Posts: 8
Likes: 0
From:
Default Clutch cable

All up in your face or not? My cable runs right in front of the speedo, I catch myself lowering or raising my head to see if that's a 5 or a 3.
 
Reply
Old Oct 12, 2007 | 01:54 PM
  #2  
firemanron's Avatar
Joined: Jul 2007
Posts: 301
Likes: 0
From:
Default RE: Clutch cable

Do a search man. theres a piece you can order to get the cable out of your sight. just look under search for clutch cable. it should show up.
 
Reply
Old Oct 12, 2007 | 01:58 PM
  #3  
F4Isvt's Avatar
Joined: Jan 2006
Posts: 467
Likes: 0
From:
Default RE: Clutch cable

theres a piece that holds the resonator on your air box that works great too. and its free honda gave you two of them just not three go figure
 
Reply
Old Oct 12, 2007 | 03:12 PM
  #4  
letsride's Avatar
Senior Member
Joined: Oct 2007
Posts: 1,407
Likes: 1
From: Central Ca.
Default RE: Clutch cable

What I used was a wire coat hanger.Cut off about 4 inches loop both ends attach one end to bolt on left clip on and wrap the other end around the cable to where you can see better.
 
Reply
Old Oct 12, 2007 | 03:23 PM
  #5  
ampfp's Avatar
Senior Member
Joined: Sep 2006
Posts: 732
Likes: 1
From:
Default RE: Clutch cable

I used wire-twists from one of my computer cables... just tied it together with the throttle cables in a way that doesnt obstruct the speedo and doesnt pull the throttle cables.
 
Reply
Old Oct 13, 2007 | 03:23 AM
  #6  
Aken's Avatar
July 2008 ROTM
Joined: Oct 2007
Posts: 3,001
Likes: 0
From: Milwaukee
Default RE: Clutch cable

Route the cable through the lower fairing stay (the bottom metal piece holding on the upper fairing stay - the piece that holds your upper fairing/mirrors, and the gauges). It won't completely clear the gauge, but it will be well below the speedometer. Mine only covers my mileage, and even then it just barely covers it.
 
Reply
Old Oct 14, 2007 | 06:05 PM
  #7  
jimd2p's Avatar
Senior Member
Joined: Aug 2006
Posts: 394
Likes: 0
From:
Default RE: Clutch cable

http://www.f4iclutchcableguide.com/

Works and looks great
 
Reply
Old Oct 14, 2007 | 08:53 PM
  #8  
thirdgenlxi's Avatar
Ironmang
Joined: Jul 2005
Posts: 1,811
Likes: 3
From: Bostic, NC
Default RE: Clutch cable

ORIGINAL: jimd2p

http://www.f4iclutchcableguide.com/

Works and looks great
+1 That's what I got too... works great!
 
Reply
Old Oct 14, 2007 | 10:10 PM
  #9  
Aken's Avatar
July 2008 ROTM
Joined: Oct 2007
Posts: 3,001
Likes: 0
From: Milwaukee
Default RE: Clutch cable

ORIGINAL: jimd2p

http://www.f4iclutchcableguide.com/

Works and looks great
That looks like a good solution, however routing it through the bottom fairing stay puts it in virtually the same position, and it's free.

Up to you guys I guess
 
Reply
Old Oct 14, 2007 | 10:15 PM
  #10  
MotoGPFan26's Avatar
Joined: Sep 2007
Posts: 139
Likes: 0
From:
Default RE: Clutch cable

It's really weird how I read posts like this. I'm a short guy...only 5"9" and my cable only obscures my view of the tripmeter just a wee bit...but nothing else.

Either you guys are midgets or I lucked up and got one of the few F4i's with a slightly different bent clutch cable...
 
Reply



All times are GMT -5. The time now is 11:20 PM.