cleaning up the rear end
#1
#2
#3
#4
RE: cleaning up the rear end
Would you post more pics to show the "kit" and how one might install the same mod? This looks like the eliminator I've been lookin for. (cheap!)
ORIGINAL: ninetyfivehp
if you wanna go the el cheapo route. just get a hacksaw and 2 sell tapping sheetmetal screws and walla.
if you wanna go the el cheapo route. just get a hacksaw and 2 sell tapping sheetmetal screws and walla.
#5
RE: cleaning up the rear end
no kit. free mod. i just used a hacksaw to clear away all the pastic mud flap i could. then used a file to clean up the edges. took a punch and put 2 small holes in my plate and a slightly larger one for the key. then i just took 2 self tapping sheetmetal screws, put a little blue loctite on em, and mounted the plate as high as possible. it almost touches the tailight. the screws are just threaded into the plastic under the tailight.
#7
#9
#10
RE: cleaning up the rear end
here ya go man. costs about 20 bucks and took me an afternoon. Save it for a rainy day
http://cbrworld.net/forums/thread/109887.aspx
http://cbrworld.net/forums/thread/109887.aspx