CBR Forum - Enthusiast forums for Honda CBR Owners

CBR Forum - Enthusiast forums for Honda CBR Owners (https://cbrforum.com/forum/)
-   F4i - Main Forum (https://cbrforum.com/forum/f4i-main-forum-11/)
-   -   Bike stolen, found but now dosnt work (https://cbrforum.com/forum/f4i-main-forum-11/bike-stolen-found-but-now-dosnt-work-114551/)

drew0387 07-30-2010 08:46 AM

Bike stolen, found but now dosnt work
 
My bike got stolen the other night and found by the police the same night about a half mile from my place. However when it was found they broke the steering lock and also cut the ignition wires in hopes of trying to hot wire it but were unsucessful.

I have since then reconnected the ignition wires and check the battery and all the fuses and I still get no lights or anything on the cluster to come on.

Anyone have and ideas that might be able to help me because im all out of them now

crashking 07-30-2010 08:51 AM

I really dont have any info to help sorry, but atleast you got her back and congrats on that

hope you get her fixed and tearin up the roads soon

__Z__ 07-30-2010 08:57 AM

have u traced all the cluster wires?

R Dub 07-30-2010 09:06 AM

I have heard that Honda uses a pink wire that goes from the ignition to the ECU and this is an "Anti Theft" wire so if it is cut it will not allow the bike to start. I also heard it has a diode hooked to it so you might want to check that as well.

drew0387 07-30-2010 10:06 AM


Originally Posted by R Dub (Post 952201)
I have heard that Honda uses a pink wire that goes from the ignition to the ECU and this is an "Anti Theft" wire so if it is cut it will not allow the bike to start. I also heard it has a diode hooked to it so you might want to check that as well.

Yeah they cut that wire, i just reconnected it along with all the other wires back to each other assuming that would do the trick of all the ignition wires.

drew0387 07-30-2010 10:08 AM

1 Attachment(s)

Originally Posted by zmds18 (Post 952199)
have u traced all the cluster wires?

yeah i followed all the wires into the harness and everything seemed to check out ok, attached is a pic of the wires they cut that i have reconnected

__Z__ 07-30-2010 10:11 AM

since youve reconnected have you tried resetting the ecu by taking the battery out and putting it back in?

Survivalism 07-30-2010 10:16 AM

Also make sure those wires are not shorting with each other / the frame. Not sure if that will make a difference but i wouldnt want them touching.

__Z__ 07-30-2010 10:18 AM


Originally Posted by Survivalism (Post 952224)
Also make sure those wires are not shorting with each other / the frame. Not sure if that will make a difference but i wouldnt want them touching.

+1 i suggest heat shrink..

Sick97SS 07-30-2010 10:39 AM

This thread my help, all about that pink wire.....
http://www.stuntlife.com/forums/444-...tion-pink.html

and another
http://remotestartbike.com/pinkwire.html


All times are GMT -5. The time now is 12:07 PM.


© 2024 MH Sub I, LLC dba Internet Brands