Aftermarket switches??
#1
Aftermarket switches??
I have an '06 F4i and I was wondering if anyone has any switches on their bikes for like LEDS or anything else? If so where did you mount the switch, pictures??
I want to put some leds on my bike but I don't want them on all the time so I want to put a switch in but I don't see any easy/convenient so I'm looking for ideas!
Nick
I want to put some leds on my bike but I don't want them on all the time so I want to put a switch in but I don't see any easy/convenient so I'm looking for ideas!
Nick
#5
RE: Aftermarket switches??
check out a website called laptimerholders.com
they are made for lap timers for track bikes but it lookes to me like you could easily mount some switches in there if you drill the holes you want
only problem is that there may not be room with stock clip-ons to mount them above the tripple like I have mine so that might not even work, but its something to look into
they are made for lap timers for track bikes but it lookes to me like you could easily mount some switches in there if you drill the holes you want
only problem is that there may not be room with stock clip-ons to mount them above the tripple like I have mine so that might not even work, but its something to look into
#6
RE: Aftermarket switches??
follow the cover of the air rams up top to where they bolt into your upper fairing/windshield. there should be 2 predrilled holes (one on either side) just below the screw that holds the covers onto the fairing mounts. that is the best place for them. and the holes are already there for you. thats just my 2 cents though
#7
#9
RE: Aftermarket switches??
Which kind of switches do you use? I'm looking to do the same to my bike, and I'd want them on the outside so I can reach it at will, but not so obvious so little Johnny Grabsalot doesn't walk over and flip the switch a thousand times when I'm not watching. Are there switches designed for this use, and water resistant?
#10