CBR Ignition Module
#1
CBR Ignition Module
New to the CBR world and the Forum, Ive asked this in the general tech and havent gotten much hopefully this is where the answer lies, I currently have a 94 CBR600F2 when I bought it, it had some mechanical issues for one the wiring harness has been hacked I have the ICM but do not know which wires go to which pin so Does anyone know the Pinouts for the ICM or have a picture of there harness or can take a look? any help is greatly appreciated.
#4
There's the manual with the full wiring diagram online... for free...
http://www.letmegooglethatforyou.com/
Search there :P
http://www.letmegooglethatforyou.com/
Search there :P
#7
#8
#9
Blue/yellow-stripe = Ignition coil (cyl1-4)
Yellow/blue-stripe = Ignition coil (cyl2-3)
Black/white-stripe = both coils, also starter switch assembly
Light Green = Neutral Safety switch harness
Yellow/Green-stripe = Tach harness
Green = ground
Yellow = Ignition Pulse Generator harness
White/Yellow-stripe = Ignition Pulse Generator harness
Green/White-stripe = Sidestand and clutch switch
Unfortunately the Honda manual doesn't have pinouts on the plug. I'll try and sketch it out tonight or tomorrow for you.
Yellow/blue-stripe = Ignition coil (cyl2-3)
Black/white-stripe = both coils, also starter switch assembly
Light Green = Neutral Safety switch harness
Yellow/Green-stripe = Tach harness
Green = ground
Yellow = Ignition Pulse Generator harness
White/Yellow-stripe = Ignition Pulse Generator harness
Green/White-stripe = Sidestand and clutch switch
Unfortunately the Honda manual doesn't have pinouts on the plug. I'll try and sketch it out tonight or tomorrow for you.