L&C. Here is a fresh pic of my protons up front. Very clean, bright, also serves as a running light.

Here is my girls rear end! Hot tails kit with lights. They are LED's as well. I have also added High Tech Speeds UFO light kit to the rear brake light. They are sick! It has programmable brake, turn, and running light modes. I wish I would have just put an undertail kit with no turn signals now..........

 

i was just at the High Tech Speeds UFO light kit site....looks awesome but how easy can the person behind u see that u are turning when u are applying brake??

 

i kinda like these for the front

http://estore.websitepros.com/873942...LED/Detail.bok

and rear

http://estore.websitepros.com/873942...-03/Detail.bok

 

There is no doubt as to what direction you are going"AND" applying the brake. The replacement LED board is much brighter than the stock one on the 954. I dont know why? They are both LED though. If I would have known that. This would have been one of the first mods I performed on the bike. The really great feature is on the running light. Cagers know your there just when cruising. Its a great product. Expensive, but worth it!

 

its diffenetly a nice piece....i have a few weeks to decide since we have over a foot of snow here still before i can ride so i got soem time.

 

where did u end up putting the circuit board?

 

You swap out the factory board for the one from High Tech Speed inside the rear light. Its a test of patience.........You very carefully seperate the rear light housing. Replace the board, splice wires and then seal it all back up. It took me 3 days to patiently get this one done. Great project to do while the roads are covered in snow.

 

check this stuff out


http://www.devilbikes.com/bodywork_p...EmQ0JSIDk1NA==


http://www.hotbodiesracing.com/signals.htm

http://www.hotbodiesracing.com/954RR_ut_sbk.php4

 

Hey, just so you know...those turn signals in the corner of the headlights (brow lights/euro signals) can be done for under $10 with parts from your local auto store. I did mine about a month ago, and they look and work great!

 

awesome....fill me in on how to do it.....just buy some leds?