in the service repair manuel it says the swingarm bolt thats connected to the frame needs to be torqued at 118nm so im needing to know what that is in ft lbs. and does anybody have and suggestions on where i could maybe find a 24 mm hex key other than ebay?

 

Its 87 ft lbs. The parts store possibly. Maybe sears if there is on e close by.

 

I used a 24mm bolt and nut from the hardware store that I welded together. It will be much cheaper than a hex of that size as well. If you don't have access to a welder, a muffler shop will do it for cheap.

 

If you are cheap like i was look at the 954 how to section I did a write up for engine removal with a pic of the same special tool. Instead of one bolt and one nut welded you can use two nuts and one bolt......Pics in the 954 how to section...

 

Good lookin out riders appreciate the quick responses!