hey everyone, I have a 93 900rr and the wiring has been pulled out of the cdi harness. I wanted to know if anyone knows their locations in the plug or if you could take some close up pics of the cdi wiring for me. i really want to get this bike running. thanks

 

I'll post up some pics of my 95 here in a second (i gotta go take a picture first lol)

 

Edited so I can add diff. pictures

 

Hope that helps, if you need more just post it, and if you don't need these pics, I'll edit and erase to conserve space

 

hey thanks for the pics but it is a lil bit hard to see is there any way that you could take a pic straight on to where the wires go into the plug so i can better see what color wire goes into what hole. i want to get this right the first time. thanks again.

 

Sure can, but I'll have to do it tommorow, its almost midnight and I've got to get up at 430, not to mention its like 20 degrees outside lol. I'll post up some more pictures tommorrow

 

I don't know how to exactly show which side is up, but there are 8 places for wires in each of the two rows.

Top Row
blue/yellow yellow/red lightgreen yellow/green (blank) pink white (blank)

In between the rows there is a stamp in the connector that says mxj 52251, When it is facing to where you can read it the wiring looks just like it is written out with the wiring labeled top here being above the stuff stamped into the plastic. And also if it says blue/yellow it means mostly blue with thin yellow stripe

Bottom Row
yellow/blue red/yellow green/white black/white (blank) blue green yellow

Again I'll post pics tommorow if this doesn't help

 

thanks again that information will help a lot. if you could still send a few pics so i can just be certain that it is all correct before i power it up. also i dont know if you can get to it but i also need to know about the coil wiring. my coils have a light blue terminal and i would like to know what color wires go to this side. I appreciate your time and help with this.

 

Here's a much better one, you can use the diagram I typed above to kinda get a bearing of where the wires are at in relation to the writing stamped onto the connector

 

by the way the wire with the blue tape looking stuff is the white wire