Seriously FAST!
#22
RE: Seriously FAST!
You guys have to be ****ting me here? A STOCK bike will be hard pressed to run a 1.70 in the 60ft.......a drag car (even street legal) can roll that **** in under 1.60 easily. It takes a DAMN good rider to get a stock ride height bike in the 1.7 range. You just got your *** handed to you in the first 60ft. While you're trying not to wheelie, he's smoking your ***. A 3200lb car (if it's going to mess with a rocket it will be that light, they aren't called "sleepers" for no reason) with 600hp has 5.3lbs/HP. A 600cc anything weighing in at a realistic 420lbs with gas and a more realistic 180lbs rider pushing 105hp to the tire has 5.7lbs/HP. You just got SMOKED. That car will kick the ****ing snot out of you off the line.........I dont care how goddamn good you THINK you are.........if you aren't in the 1.7 60ft range......you're getting walked.
There are plenty of 9 second steet cars out there and they would all love to whip up on your little 600 when you get cocky.
This is a dumb, beat to death topic. If you think you can ride your 600 to a 10second 1/4 with out some SERIOUS practice time.......bring that thing out........I want to take your money.
There are plenty of 9 second steet cars out there and they would all love to whip up on your little 600 when you get cocky.
This is a dumb, beat to death topic. If you think you can ride your 600 to a 10second 1/4 with out some SERIOUS practice time.......bring that thing out........I want to take your money.
#23
RE: Seriously FAST!
You are proving my point. Your power is inversly proportional to your time. I just figure it with a 4000 lb car and my weight and what i thought a bike was... noones perfect. I never said that there were no street legal 10 sec cars. I just said I have yet to see one. Yes ive seen bikes lose to cars but mostly because the kid just bought a bike and thinks they are a bad *** but know nothing about it. If you are fighting a wheelie off the line then you need to practice a little more. Also there is a huge amount of energy lose do to friction for a car compared to a bike. So gixxereater your 3200 lb car with 600hp will probably lose to an experienced rider. and finally i have seen stock 600s run in the 10 sec with a good rider. We all have our opinions and noone is wrong and noone is right. I am just telling you from my experiences.
#25
RE: Seriously FAST!
Hey man it's no thing... I'm not the most experienced rider on here thats for sure... I just have a great bike... I've gotten a little better with my shifts and this friday is a re-match... He wants me from a dig.. But I told him a 20-roll.. So we may do both and if this post is still around I will let you know the results now that I'm use to this new bike.. Comin from an R6 that felt completely different...
DH
DH
#26
RE: Seriously FAST!
streetracing is soooo under-rated...especially when the bike gets wrapped around something.
somewhat fitting you had and R6 before...then again we have our share of squids here too. now that my lecture is over...
be careful so you don't wound up another statistic. there's been too many this season and on this board.gear up, take all precautions and watch out for innocent bystanders.
somewhat fitting you had and R6 before...then again we have our share of squids here too. now that my lecture is over...
be careful so you don't wound up another statistic. there's been too many this season and on this board.gear up, take all precautions and watch out for innocent bystanders.
#27
RE: Seriously FAST!
yea the road is a horrible place to be drag racing thats for damn sure. We have a road just 30 mins north of me that is shut down for bridge work. About 1.5 miles of fresh road. We will hang out there for hours screwing around and you dont have to worry about vehicles.
#29
RE: Seriously FAST!
ORIGINAL: gixxereater
You guys have to be ****ting me here? A STOCK bike will be hard pressed to run a 1.70 in the 60ft.......a drag car (even street legal) can roll that **** in under 1.60 easily. It takes a DAMN good rider to get a stock ride height bike in the 1.7 range. You just got your *** handed to you in the first 60ft. While you're trying not to wheelie, he's smoking your ***. A 3200lb car (if it's going to mess with a rocket it will be that light, they aren't called "sleepers" for no reason) with 600hp has 5.3lbs/HP. A 600cc anything weighing in at a realistic 420lbs with gas and a more realistic 180lbs rider pushing 105hp to the tire has 5.7lbs/HP. You just got SMOKED. That car will kick the ****ing snot out of you off the line.........I dont care how goddamn good you THINK you are.........if you aren't in the 1.7 60ft range......you're getting walked.
There are plenty of 9 second steet cars out there and they would all love to whip up on your little 600 when you get cocky.
This is a dumb, beat to death topic. If you think you can ride your 600 to a 10second 1/4 with out some SERIOUS practice time.......bring that thing out........I want to take your money.
You guys have to be ****ting me here? A STOCK bike will be hard pressed to run a 1.70 in the 60ft.......a drag car (even street legal) can roll that **** in under 1.60 easily. It takes a DAMN good rider to get a stock ride height bike in the 1.7 range. You just got your *** handed to you in the first 60ft. While you're trying not to wheelie, he's smoking your ***. A 3200lb car (if it's going to mess with a rocket it will be that light, they aren't called "sleepers" for no reason) with 600hp has 5.3lbs/HP. A 600cc anything weighing in at a realistic 420lbs with gas and a more realistic 180lbs rider pushing 105hp to the tire has 5.7lbs/HP. You just got SMOKED. That car will kick the ****ing snot out of you off the line.........I dont care how goddamn good you THINK you are.........if you aren't in the 1.7 60ft range......you're getting walked.
There are plenty of 9 second steet cars out there and they would all love to whip up on your little 600 when you get cocky.
This is a dumb, beat to death topic. If you think you can ride your 600 to a 10second 1/4 with out some SERIOUS practice time.......bring that thing out........I want to take your money.