I lt was running right before and I haven't changed anything so it should be right but should be and is are two different things I'm not looking up clearances so I can check my vavles then put the top back together , and then it's off with the forks and maybe some late night painting

 

ok a few more qustions as all ways, 1st off do the carbs have coolant running though them? as i had a few lines on the bottom os the carbs that appear to have coolant running though them. and next qustion is where do the lines go when syncing the carbs by looking at it i see two posable options, i looked at the fsm but it was vage and only showed a pic of a drawing that sucked imo but thats me any one have a pic of the set up and i can get the rest im going back out side to see what i can fuger out and check my clerances while im out there ill update ether when im ready yo burn the bike or find some more earth shattering news.

michael

 

Clearances are in check and I think I figured out the sync 1&4 hoses conect to the big hoses and 2&3 to the small ones on the top by the diagram caps?

 

Well I have the fork on the right side of the bike left if your are facing the frount apart and rolled it across the counter top and it has about a 1/4 in bow on it at its highest point. Might be a hair less than a 1/4 but still a bend is a bend. What do y'all think?

 

Other forks is worse now working on finding some forks

 

 

Sorry for te amount of posts but they keep me on track and moveing

 

small update, the parts are ordered and should be on the way soon, forks, clutch, headers,fork seals and oil for the forks, the cct, jet kit, and a few other odds and ends. im ready for them to get here im hopeing to have it back on the road by the 2nd week of april as i have a ride planned with a few friends. oh bike bandit has a few promos going right now if anyone was ordering parts from there, i got a free cover for the bike out of this order and a free batery tender from the last. good stuff imo. feel free to chime in and let me know what you think about how its going. and yes i know the bike is filthy and im working on fixing that
michael

 

Looks like its coming along nicely pal

 

thanks, i just wish the parts would get here sooner i thought about overnighting or express shiping but over night is way to high and normal shipping is just as fast as express (well most the time anyways) i have enough parts for to more all out days of work then it will be nit picking till everything else gets here. ill have to upload all the pics when i get to a few places cause i havent seen some of the stuff done. or couldnt find it ether or. and to top it all off i still want to kick the po in the nads for the wireing "work" he did.

michael