MY Custom 1 of a kind CBR F3. LOTS OF PICS!!!!!
Thread Starter
|
Member
Joined: Nov 2009
Posts: 47
Likes: 0
From: Boynton beach, FLORIDA
MY Custom 1 of a kind CBR F3. LOTS OF PICS!!!!!
FIRST i wanna thank everyone on this site for all their wisdom, without you guys this probably wouldnt have happened. 
So here it is my 95% finished product. Dont know what to call it really. It was a wrecked 96 cbr smokin joes
. Bought it cheap and decided i didnt wanna rerore it to its original condition and went a different route. I decided to do something that had never been done before and made it look how i wanted. So after 6 months i ended up with a custom fiberglass Ducati 999 race fairing for the front and a 99 r1 tail. For the seat i tried the r1 but didnt like it so i just cut the f3 seat in half. Its all matte black for now....
Heres before
DURING
and NOW!!!
WHAT DOES EVERYONE THINK?????
So here it is my 95% finished product. Dont know what to call it really. It was a wrecked 96 cbr smokin joes
. Bought it cheap and decided i didnt wanna rerore it to its original condition and went a different route. I decided to do something that had never been done before and made it look how i wanted. So after 6 months i ended up with a custom fiberglass Ducati 999 race fairing for the front and a 99 r1 tail. For the seat i tried the r1 but didnt like it so i just cut the f3 seat in half. Its all matte black for now....Heres before
DURING
and NOW!!!
WHAT DOES EVERYONE THINK?????
Senior Member
Joined: Mar 2010
Posts: 386
Likes: 0
From: east cheshire
yh not sure either i forgot to say how niece it is looks really racy oh and few more ideas
powder coat wheels black (once you decided wether to swap em)
frame sliders
have you looked at fitting the ducati lights in ? if the wires fit then you would only need a bracket . i think anyways.
and a way to cover the gap between the seat and the fairing (were you can see frame and wires) maybe aluminium carbon wrapped.
HEL braided hoses
rear fender in black (original )
oh and what front fender you got on there because i find it handles better at slow speed with a 120/70 on the front but is a bit close to the original fender.
just a few ideas hope it gets ur creative juices flowing
powder coat wheels black (once you decided wether to swap em)
frame sliders
have you looked at fitting the ducati lights in ? if the wires fit then you would only need a bracket . i think anyways.
and a way to cover the gap between the seat and the fairing (were you can see frame and wires) maybe aluminium carbon wrapped.
HEL braided hoses
rear fender in black (original )
oh and what front fender you got on there because i find it handles better at slow speed with a 120/70 on the front but is a bit close to the original fender.
just a few ideas hope it gets ur creative juices flowing
Thread Starter
|
Member
Joined: Nov 2009
Posts: 47
Likes: 0
From: Boynton beach, FLORIDA
yh not sure either i forgot to say how niece it is looks really racy oh and few more ideas
powder coat wheels black (once you decided wether to swap em)
frame sliders
have you looked at fitting the ducati lights in ? if the wires fit then you would only need a bracket . i think anyways.
and a way to cover the gap between the seat and the fairing (were you can see frame and wires) maybe aluminium carbon wrapped.
HEL braided hoses
rear fender in black (original )
oh and what front fender you got on there because i find it handles better at slow speed with a 120/70 on the front but is a bit close to the original fender.
just a few ideas hope it gets ur creative juices flowing
powder coat wheels black (once you decided wether to swap em)
frame sliders
have you looked at fitting the ducati lights in ? if the wires fit then you would only need a bracket . i think anyways.
and a way to cover the gap between the seat and the fairing (were you can see frame and wires) maybe aluminium carbon wrapped.
HEL braided hoses
rear fender in black (original )
oh and what front fender you got on there because i find it handles better at slow speed with a 120/70 on the front but is a bit close to the original fender.
just a few ideas hope it gets ur creative juices flowing
Yeah definately does, i was actually thinking of powdercoating the wheels orange, because im thinking of theming it "Dia de los muertos" which is the day of the dead (halloween). I actually have the original stock front fender on there, sounds like a possibility though. I did look into the ducati lights but i actually like the look of the front wihtout the holes, im gonna mount the lights in the front vent holes being as they are nonfunctional.
Thanks for the compliment and ideas though.
