CBR 600F3 1995 - 1998 CBR 600F3 Forum

Does anyone make the actual 95-95 tail?

Thread Tools
 
Search this Thread
 
  #1  
Old 12-18-2009 | 09:30 PM
dyracuse's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 374
Likes: 0
From: Wisconsin Rapids, Wi
Default Does anyone make the actual 95-95 tail?

I have a 96 cbr and I don't need them now, but I only had the bike for a week before the winter, so I'm sure the inevitable noob drop or small low speed slide will happen next year at some point. Anyways, everyone sells 95-98 tails, but they only fit the 96 with the new tail light and what not. My problem is that I am not partial to that new aged cats eye tail light, so what kind of options do I have other than original production parts since everyone seems to make 97-98?
 
  #2  
Old 12-18-2009 | 09:56 PM
Kuroshio's Avatar
Senior Member
Joined: Jul 2009
Posts: 4,471
Likes: 3
From: West Philly, PA!
Default

Ebay for used. Possibly Maier for an aftermarket replacement.

http://www.maier-mfg.com/shop.cfm?ac...modelyear=1995

Says specifically 1995-1996
 
  #3  
Old 12-18-2009 | 10:23 PM
dyracuse's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 374
Likes: 0
From: Wisconsin Rapids, Wi
Default

don't think that would work though, mine is purple, so it wouldn't match
 
  #4  
Old 12-18-2009 | 10:33 PM
Kuroshio's Avatar
Senior Member
Joined: Jul 2009
Posts: 4,471
Likes: 3
From: West Philly, PA!
Default

Well going with maier usually means repainting so color doesn't matter.

If you're trying to find a OEM replacement with factory colors, you can buy brand new from ronayers.com, bikebandit.com or cheapcycleparts.com. The all have online micro-fiches of our bikes with brand new OEM parts...

And I don't think purple wasn't offered on the 95-96 F3s. They were ross white & black according to all the microfiches availible. Purple was 97-98 & SJE
 
  #5  
Old 12-18-2009 | 10:34 PM
dyracuse's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 374
Likes: 0
From: Wisconsin Rapids, Wi
Default

It's the usa version and I've checked where they show the different bikes and it is a standard 96 paint job on the 600, and my shop says it is as well. It's definitely a factory job, no doubt in my mind.
 
  #6  
Old 12-18-2009 | 10:39 PM
dyracuse's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 374
Likes: 0
From: Wisconsin Rapids, Wi
  #7  
Old 12-18-2009 | 10:47 PM
Kuroshio's Avatar
Senior Member
Joined: Jul 2009
Posts: 4,471
Likes: 3
From: West Philly, PA!
Default

Ah... actually, it's not a standard 96 paint job. It's a SJR (Smokin Joe's Racing) edition.

http://partsfinder.onlinemicrofiche....3&B=3&Action=O

http://partsfinder.onlinemicrofiche....=13&A=163&B=44

Didn't know they made SJRs in 96. My bad. Same websites -> OEM parts and under Hondas for 96 you'll see the CBR 600 SJR. That bike is purple.
 
  #8  
Old 12-18-2009 | 11:17 PM
NYKnick1015's Avatar
Senior Member
Joined: May 2009
Posts: 604
Likes: 0
From: New York
Default

any tail pieces u find, i gaurentee ur gonna have to repaint at some point. i can sell u my tail once i get my new one. i wouldnt mind selling it cheap
 
  #9  
Old 12-19-2009 | 01:25 AM
dyracuse's Avatar
Thread Starter
|
Senior Member
Joined: Nov 2009
Posts: 374
Likes: 0
From: Wisconsin Rapids, Wi
Default

I can assure you it is not a smoking Joe's edition, they came with a yellow front rim and black rear rim. Also the paintjob is completely different and has sponsors, I've seen a 96sje, and this definately is not it, however it is a standard 96 paintjob, I've seen it around everywhere.
 
  #10  
Old 12-19-2009 | 03:02 AM
spicymeowmix's Avatar
Official Welcome Crew Spicy Cat
Joined: Oct 2009
Posts: 1,655
Likes: 2
From: Auburn, AL
Default

I loved the way my bike originally looked before it went down,
but I would suggest finding a simple color and stick with it in replacement if your bike does fall, because replacing the exact color pieces can get pricey.

Another alternative might be to replace all the plastics now with crappy / unpainted / cheap ones so that once you are geared and well experienced you can put those original plastics back on.
 


Quick Reply: Does anyone make the actual 95-95 tail?



All times are GMT -5. The time now is 05:57 AM.