Anybody have awesome HID lights?
#13
#15
I've ordered from them 3 times, all 3 times I received my HID's within 5 business days... so not sure what you're talking about... Their support sucks but they have decent turn around... unlike futurlec *mumbles*
#16
good point, I just remembered when I ordered mine the kit was on back order due to an issue with customs.
Moses
#18
I figured it was due to customs cause of this post here https://cbrforum.com/forum/aftermarket-28/h-i-d-kit-ddmtuning-106650/ which made sense to me since nothings made in the USA when it come to electonics for the most part
Moses
Moses
Last edited by WiSH2oo0; 09-19-2010 at 09:31 PM.
#19
I did find this little tid bit too
Jim from DDM Tuning
"They are made in Guangdong Province, China. They cost me almost nothing. The bulbs are made in Zhejiang Province, China. they don't cost much either. They ARE the same bulbs in the Apexcone and DDM kits.
If the ballasts continue to perform as they have so far, we'll bring production of them to the USA this next year. Worst case, if I can't get around the last little thing I need to do to keep the DOT off my doorstep, I'll make them just across the border in Mexico and drive them over by the truckload every day instead of hiring Mexican women to make them in San Diego.
But I'm pretty sure I have my little ducks lined up on DOT and we'll be making them right here.
Jim"
http://forums.bimmerforums.com/forum....php?t=1127948
Than if you goto there website and you'll see there address'
Taiwan
2F-3 No. 11 Sec 2
Changsha Street
Wanhua District
Taipei City 10846
Taiwan ROC
and
China
DDM Tuning
Baijahu International Garden
Building 6, Room# 1085
Liyuanzhong Road, Jiangning District
Nanjing, Jiangsu Province, 211100
China
So chances are there made over seas and sent here
Moses
Jim from DDM Tuning
"They are made in Guangdong Province, China. They cost me almost nothing. The bulbs are made in Zhejiang Province, China. they don't cost much either. They ARE the same bulbs in the Apexcone and DDM kits.
If the ballasts continue to perform as they have so far, we'll bring production of them to the USA this next year. Worst case, if I can't get around the last little thing I need to do to keep the DOT off my doorstep, I'll make them just across the border in Mexico and drive them over by the truckload every day instead of hiring Mexican women to make them in San Diego.
But I'm pretty sure I have my little ducks lined up on DOT and we'll be making them right here.
Jim"
http://forums.bimmerforums.com/forum....php?t=1127948
Than if you goto there website and you'll see there address'
Taiwan
2F-3 No. 11 Sec 2
Changsha Street
Wanhua District
Taipei City 10846
Taiwan ROC
and
China
DDM Tuning
Baijahu International Garden
Building 6, Room# 1085
Liyuanzhong Road, Jiangning District
Nanjing, Jiangsu Province, 211100
China
So chances are there made over seas and sent here
Moses
#20
I did find this little tid bit too
Jim from DDM Tuning
"They are made in Guangdong Province, China. They cost me almost nothing. The bulbs are made in Zhejiang Province, China. they don't cost much either. They ARE the same bulbs in the Apexcone and DDM kits.
If the ballasts continue to perform as they have so far, we'll bring production of them to the USA this next year. Worst case, if I can't get around the last little thing I need to do to keep the DOT off my doorstep, I'll make them just across the border in Mexico and drive them over by the truckload every day instead of hiring Mexican women to make them in San Diego.
But I'm pretty sure I have my little ducks lined up on DOT and we'll be making them right here.
Jim"
http://forums.bimmerforums.com/forum....php?t=1127948
Than if you goto there website and you'll see there address'
Taiwan
2F-3 No. 11 Sec 2
Changsha Street
Wanhua District
Taipei City 10846
Taiwan ROC
and
China
DDM Tuning
Baijahu International Garden
Building 6, Room# 1085
Liyuanzhong Road, Jiangning District
Nanjing, Jiangsu Province, 211100
China
So chances are there made over seas and sent here
Moses
Jim from DDM Tuning
"They are made in Guangdong Province, China. They cost me almost nothing. The bulbs are made in Zhejiang Province, China. they don't cost much either. They ARE the same bulbs in the Apexcone and DDM kits.
If the ballasts continue to perform as they have so far, we'll bring production of them to the USA this next year. Worst case, if I can't get around the last little thing I need to do to keep the DOT off my doorstep, I'll make them just across the border in Mexico and drive them over by the truckload every day instead of hiring Mexican women to make them in San Diego.
But I'm pretty sure I have my little ducks lined up on DOT and we'll be making them right here.
Jim"
http://forums.bimmerforums.com/forum....php?t=1127948
Than if you goto there website and you'll see there address'
Taiwan
2F-3 No. 11 Sec 2
Changsha Street
Wanhua District
Taipei City 10846
Taiwan ROC
and
China
DDM Tuning
Baijahu International Garden
Building 6, Room# 1085
Liyuanzhong Road, Jiangning District
Nanjing, Jiangsu Province, 211100
China
So chances are there made over seas and sent here
Moses