Well yesterday I crashed up at Palomar Mt.
#1
Well yesterday I crashed up at Palomar Mt.
So we were riding up at Palomar mountian today and the day was going great untill i go around this damn turn and my tire blows out then there i go flying over the handle bars right onto the road and into the gard rail. But yeah just to let you know guys know i am ok but check out the pics. So i am going to be needing a few parts for my bike and if anyone could help me out. If you have spare parts or need to sell some parts or even know of some sites to ored them for cheap would be. Please let me know. I am going to be needing the front (top) faring, Rear Sets, Mirrors, and a New tire. But i can buy the tire here.
#3
RE: Well yesterday I crashed up at Palomar Mt.
Glad your ok Fella... looks like a hell of a spill. I bet that road rash stings??????
Always plenty of spares around here in UK dunno about over there in the US though. also you can still get the plastics from HONDA but they are real pricey
What make of tyre is that by the way??????????
Always plenty of spares around here in UK dunno about over there in the US though. also you can still get the plastics from HONDA but they are real pricey
What make of tyre is that by the way??????????
#4
#5
RE: Well yesterday I crashed up at Palomar Mt.
Glad you are ok...! That's first and it looks like that the only two parts you will need to change are the tire that blew and the upper faring..!!!
The shift lever can be straighten out by using a wrench such as the size for the rear axle bolt. the tool that I use is a open end and a closed end 1 1/16 fitted end take that end and put on the shift lever and just slowly tweak it back straight. I do it all the time when I go down at the track and it works fine or you can go on ebay and get a used one for cheap. here is the link cut and paste and it will take you right too the department you need, this is where I get all my prts.....One we ride and....we keep on riding that's what this is all abouthttp://search.ebay.com/600-f2-honda_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQ coentrypage
ZsearchQQcopagenumZ1QQfposZ90018QQfromZR10QQfsooZ1 QQfsopZ1QQftrtZ1QQftrvZ1QQmppfqyZf2Q20600
Q20partsQQmppfqyZf2Q20600Q20partsQQsacatZQ2d1QQsad isZ200QQsargnZQ2d1QQsaslcZ2QQsbrftogZ1QQsofocusZbs
The shift lever can be straighten out by using a wrench such as the size for the rear axle bolt. the tool that I use is a open end and a closed end 1 1/16 fitted end take that end and put on the shift lever and just slowly tweak it back straight. I do it all the time when I go down at the track and it works fine or you can go on ebay and get a used one for cheap. here is the link cut and paste and it will take you right too the department you need, this is where I get all my prts.....One we ride and....we keep on riding that's what this is all abouthttp://search.ebay.com/600-f2-honda_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQ coentrypage
ZsearchQQcopagenumZ1QQfposZ90018QQfromZR10QQfsooZ1 QQfsopZ1QQftrtZ1QQftrvZ1QQmppfqyZf2Q20600
Q20partsQQmppfqyZf2Q20600Q20partsQQsacatZQ2d1QQsad isZ200QQsargnZQ2d1QQsaslcZ2QQsbrftogZ1QQsofocusZbs
#6
RE: Well yesterday I crashed up at Palomar Mt.
Glad you are ok...! That's first and it looks like that the only two parts you will need to change are the tire that blew and the upper faring..!!!
The shift lever can be straighten out by using a wrench such as the size for the rear axle bolt. the tool that I use is a open end and a closed end 1 1/16 fitted end take that end and put on the shift lever and just slowly tweak it back straight. I do it all the time when I go down at the track and it works fine or you can go on ebay and get a used one for cheap. here is the link cut and paste and it will take you right too the department you need, this is where I get all my prts.....One we ride and....we keep on riding that's what this is all abouthttp://search.ebay.com/600-f2-honda_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQ coentrypage
ZsearchQQcopagenumZ1QQfposZ90018QQfromZR10QQfsooZ1 QQfsopZ1QQftrtZ1QQftrvZ1QQmppfqyZf2Q20600
Q20partsQQmppfqyZf2Q20600Q20partsQQsacatZQ2d1QQsad isZ200QQsargnZQ2d1QQsaslcZ2QQsbrftogZ1QQsofocusZbs
The shift lever can be straighten out by using a wrench such as the size for the rear axle bolt. the tool that I use is a open end and a closed end 1 1/16 fitted end take that end and put on the shift lever and just slowly tweak it back straight. I do it all the time when I go down at the track and it works fine or you can go on ebay and get a used one for cheap. here is the link cut and paste and it will take you right too the department you need, this is where I get all my prts.....One we ride and....we keep on riding that's what this is all abouthttp://search.ebay.com/600-f2-honda_W0QQbsZSearchQQcatrefZC6QQcoactionZcompareQQ coentrypage
ZsearchQQcopagenumZ1QQfposZ90018QQfromZR10QQfsooZ1 QQfsopZ1QQftrtZ1QQftrvZ1QQmppfqyZf2Q20600
Q20partsQQmppfqyZf2Q20600Q20partsQQsacatZQ2d1QQsad isZ200QQsargnZQ2d1QQsaslcZ2QQsbrftogZ1QQsofocusZbs
#7
RE: Well yesterday I crashed up at Palomar Mt.
thanks guys. Yeah i guess that front tire was pretty old and weatherd but yeah i am glad im ok. Yeah it should not cost me much at all to get this all fixed up and ready to go. But thanks for everyones support. I have already found a lot of piecies that i need just a matter of $$ now. But i should have everything done in about 2-3 weeks mabye a little longer
#8
RE: Well yesterday I crashed up at Palomar Mt.
wow...you were one of the unlucky few up there this weekend eh?
good thing you're ok!!!
look at the tire...and read what it said on there...'made in taiwan'....
i think you should get better rubbers next time...not saying that it's bad cause it's made in taiwan, but maybe hit up some more reputable brands like pirellis or something. a blow out at the twists....that's just HORRIBLE!
t
good thing you're ok!!!
look at the tire...and read what it said on there...'made in taiwan'....
i think you should get better rubbers next time...not saying that it's bad cause it's made in taiwan, but maybe hit up some more reputable brands like pirellis or something. a blow out at the twists....that's just HORRIBLE!
t
#9
RE: Well yesterday I crashed up at Palomar Mt.
yeah i understand what your saying. But yeah i bought the bike with those tires. the rear tire is a Dunlop Qualifer 170/70/zr17 and the front was some crappy 110/70/17 so when i get a new tire i am going to buy the dunlop qualifer front tire 120/70/17 (i know that is the recomended size for our bikes)
#10
RE: Well yesterday I crashed up at Palomar Mt.
I dropped my bike yesterday at a stop light going about 3mph.
Scractched up the left side-I'll snap some pics this afternoon when I go look at her.
i thought the damage was horrible yesterday, but I'm sure I was just ove rre acting...well see today how messed up mint f2 is before I ever got ahold of it =..[
Scractched up the left side-I'll snap some pics this afternoon when I go look at her.
i thought the damage was horrible yesterday, but I'm sure I was just ove rre acting...well see today how messed up mint f2 is before I ever got ahold of it =..[