CBR 600F2 1991 - 1994 CBR 600F2

Specs for EBC 310mm conversion bracket?

  #1  
Old 11-10-2016, 01:15 AM
Member
Thread Starter
Join Date: May 2009
Posts: 38
Default Specs for EBC 310mm conversion bracket?

I just ordered some of the EBC 310mm floating rotors for my F2. I know they stopped making the caliper relocation brackets (BRK#15S) some time ago. I was wondering if someone who actually has them has or can take measurements of them so I can get a set made. Any help would be greatly appreciated.
 
  #2  
Old 11-10-2016, 06:52 AM
Senior Member
Join Date: Jul 2011
Location: north/central WV
Posts: 1,136
Default

We've been waiting on those measurements for almost a year. Someone from Canada got on this site and said "hey everyone, I found those EBC brackets for 310mm rotors and when I get them I get the measurements out to all you guys." Thats what he said and like I said we've been waiting for almost a year. So dont hold your breath.
 
  #3  
Old 11-10-2016, 06:59 AM
Senior Member
Join Date: Jul 2011
Location: north/central WV
Posts: 1,136
Default

I was wrong, we've been waiting for over a year. Search "larger rotors for F2 rims", and you will see where I kind of pissed him off a little bit. I got lucky about a year ago and found and bought a used Ferodo 310mm rotors AND the Ferodo brackets complete kit.
 

Last edited by coalminer frank; 11-10-2016 at 07:05 AM. Reason: Xcitement #711
  #4  
Old 11-10-2016, 12:01 PM
Member
Thread Starter
Join Date: May 2009
Posts: 38
Default

Ya I know coalminerfrank, you mean dakiota. I've been reading through a lot of posts on here for awhile so I know what you mean. I was just curious if anyone else happened to have the brackets, I know JNS used to on his race F2, but he sold that I think. How much different is your ferodo kit with the bracket?
 
  #5  
Old 11-10-2016, 05:39 PM
Senior Member
Join Date: Jul 2011
Location: north/central WV
Posts: 1,136
Default

Yes, Dakiota. The Ferodo kit is not as robust looking as the EBC kit but I'm sure its more than up to the task or they would not have made and sold it. I actually made a homemade set by copying the Ferodo brackets, out of 1/2 inch aluminum flat stock and some aluminum spacers. It took quite a while with bandsaw, drill press, hacksaw, bench beltsander etc. But, with all that snow we had last winter and being laidoff, I had the time. Then throw in a couple Triumph Bonneville OEM front rotor and I have a homemade 310mm oversize brake kit that was/is way cheaper the the Ferodo or EBC kit.
 
  #6  
Old 11-10-2016, 11:35 PM
Member
Thread Starter
Join Date: May 2009
Posts: 38
Default

Nice! Ya I'm gonna start taking measurements for the brackets once the rotors arrive in a week or so.....gonna have a local machine shop cnc them for me....I'll most definitely will post some pics as I go, thanks for the response frank.
 

Last edited by 92CBR600F2 Supersport; 11-10-2016 at 11:40 PM.
  #7  
Old 11-11-2016, 06:39 AM
Senior Member
Join Date: Jul 2011
Location: north/central WV
Posts: 1,136
Default

I was surprised when I got the Ferodo brackets that the "spacing out" was not the same at the top as the bottom, they were 2 different measurements. You would think that since the original F2 rotors are 270 mm or so(cant remember) diameter and the BIG NEW ONES will be 310 mm that you could just move the mounting position out 20 mm. Half the increased size diameter. But I dont know.
Does that make any sense. Maybe they should be two different measurements like the Ferodos because of the radius of the bigger rotors.
 

Last edited by coalminer frank; 11-11-2016 at 06:54 AM. Reason: Xcitement 711
  #8  
Old 11-11-2016, 11:11 AM
Member
Thread Starter
Join Date: May 2009
Posts: 38
Default

Ya my buddy was saying something about half the size out too. Ya the mounting points for top & bottom are different, I can see that in the pics of the EBC brackets.
Ya it'll definitely be interesting to take the measurements. Once I get the definitive measurements I'll actually post them on here for everyone. If I actually had them like dakiota it'd take me a few hours to post them here. I guess he just got really 'busy' or just plain forgot about us. It's all good though. I think everyone has heard so much about these mythical brackets that nobody cares anymore because nothing ever materialized of them for 99% of us. Anyways I'll keep everyone updated.
 
  #9  
Old 11-11-2016, 04:59 PM
Senior Member
Join Date: Jul 2011
Location: north/central WV
Posts: 1,136
Default

Im stupid, I dont know how to post pics. The one time I managed to do it, it was "fathead" size of me at the track so..........If you go to my FB page you can see pics of my homemade brackets along with the Ferodo kit. frank/spatafore/monongah/wv.
 
  #10  
Old 11-12-2017, 08:58 PM
EchoWars's Avatar
Senior Member
Join Date: Sep 2017
Location: Kansas City
Posts: 363
Default

Gonna resurrect this one...anyone ever come up with some measurements for the relocation brackets?
 

Thread Tools
Search this Thread
Quick Reply: Specs for EBC 310mm conversion bracket?


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.