going for the streetfighter look. What sites would guys recommend for parts (headlights,ideas, etc.) Also i want to take the entire cluster and upperfairing off of my bike and replce with a digital speed/tach. I dont know where to find a tach specific to this bike. Any idea?

 

a vapor gauge setup will work nicely. if you're dumping the side fairings and stock gauges I"ll take those though, my tach is dead and I want to finish putting fairings on my bike.

 

wild hair accessories - http://www.whaccessories.com/
this is mainly an all-in-one site but if you are looking for something specific then post up and i'll list the site(s).

 

thanks. yea ill be getting rid of the upper fairing stay and the guage cluster which reads only 19xxx miles. no fairings tho sorry. Specifically i am looking for a digital tach/speedo and a fighter headlight, and i am not sure what tail end i am gonna go for yet

 

there are also some nice gauges built by Koso, a local motorcyclist was looking into something like this himself. I'll look some of this up for you.
your options go from $120-1000 depending on exactly how fancy you want to get.

 

does anyone know which trailtech vapor fits the 87 cane? i want it immediatly!

 

also, i see some of the customs with fabricated plaastics on them. Looks like they are self molded. where can i find this stuff i would like to see wat i can do with it

 

there is a seller on ebay that sells the trailtech vapor, email them and ask what they can get. but I"ve found some other gauges that look much more refined and have a slew of gizmos you may not even ever figure out a USE for. like a GPS in the cluster.

 

you can use a heat gun, acrylic sheets, and a crude mold. acrylic is the same stuff used for aftermarket windscreens such as zerogravity.

here is something to get you started: http://www.plasticsmag.com/ta.asp?aid=2260

 

This was the response i got from trail tech for the Vapor Digital Tach/Speedo setup that would fit this bike:

I would recommend kit number 75-600. You will have to get a different temp sensor thought. The temp sensor you will need is part number 7500-3060 Justin Yancy Trail Tech, Inc.
Phone: (360) 687-4530
Email: justin@trailtech.net