my cane is wrecked :(
Friday night i was cut off by a careless old bat, who i might add fled the scene of the accident she caused. long story short i laid it down to avoid hitting the car and dieing.
My cane is damaged really bad.
What i need is:
1 - Stock Set of mirrors
1 - Left Foot Peg with Bracket (peg by gear shift ) DOES ANY ONE KNOW THE PART # FOR THIS?
1 - Rear Signal Assembly
1 - Left Handle bar Grip End Cap With Screw
1- Front Upper Faring (no head lap or signals needed)
1 - Plastic piece that bolts to upper faring and lower front faring (runs under the left handle bar from the tank to the Instrument Cluster)
1 - Left Front Lower Faring
and lastly
1 - Swing Arm Fender
Color does not matter i will be painting the bike but black is preferable as the rest of my bike is black.
thanks allot hope you guys can help me out!
My cane is damaged really bad.
What i need is:
1 - Stock Set of mirrors
1 - Left Foot Peg with Bracket (peg by gear shift ) DOES ANY ONE KNOW THE PART # FOR THIS?
1 - Rear Signal Assembly
1 - Left Handle bar Grip End Cap With Screw
1- Front Upper Faring (no head lap or signals needed)
1 - Plastic piece that bolts to upper faring and lower front faring (runs under the left handle bar from the tank to the Instrument Cluster)
1 - Left Front Lower Faring
and lastly
1 - Swing Arm Fender
Color does not matter i will be painting the bike but black is preferable as the rest of my bike is black.
thanks allot hope you guys can help me out!
I will check my stuff, but I think I have a left access panel and a rear fender (signal assembly). They may or may not be in pristine condition. I will check and post pics if you are interested.
I am definitely interested... i got a local Bike wrecker getting back to me too. but i atleast need the foot peg so its rideable.
and thanks. im glad im ok as well. eating the side of that car wouldn't have been fun. i cant beleive the old bat ran tho. now this is all out of my pocket.
and thanks. im glad im ok as well. eating the side of that car wouldn't have been fun. i cant beleive the old bat ran tho. now this is all out of my pocket.
eBay has a lot of stuff.
You can find PN's looking on these drawings...
http://www.cyclepartsnation.com/page...d/7/Honda.aspx
You can find PN's looking on these drawings...
http://www.cyclepartsnation.com/page...d/7/Honda.aspx
I found this place on the internet. Haven't used them yet but it's the cheapest I could find new plastic. It appears they mold it themselves and you have to sand, paint & drill out the mounting holes...
http://www.airtech-streamlining.com/...00F1198790.htm
http://www.airtech-streamlining.com/...00F1198790.htm


