I purchased a cbr1000rr about two months ago and put a Jardine slip on. Now I am asking for some ideas on rear turn signals. I am trying to shy away from integrated ones, so if you have any ideas please let me know. I am also looking for some body work for my bike so I can start custom painting it. I will have one set of body work for the road and track and one to show off. Thanks

 

http://sportbikecreations.net/footpegs.htm

 

I replied to your other post, But if your gonna switch between 3 fairings I`d recomend at least one Spare wiring loom from the Clocks to the ecu and a spare bank angle sensor, I use 2 sets Track & Road and when you change them over you have to take the light cluster out of the nose cone to get the wiring loom out from behind them. Not hard but it makes a 10 min job more like an hour at least.

If you change em frequent it starts to get you annoyed. Now I have a spare I can remove the front cowl fully intact and set it aside. It now takes me 10 mins to change every thing over. [sm=goodidea.gif]

 

Email Tripage at tpage7@cfl.rr.com for these. He does extremely great work and has a super fast turn around for reasonable prices. Tell him you are from a CBR forum and might give you an even better price. Tell him Calkidd from RRzone sent you.

[IMG]local://upfiles/149/BFF23580282F4382B2ADAF205FD49B88.jpg[/IMG]

[IMG]local://upfiles/149/8915BA31F4D94EBCB118B3AA16A82A3E.jpg[/IMG]

 

yeah, repost.