CBR 1000F "Hurricane" 1987-1996 CBR 1000F

Switched plugs now no spark

Thread Tools
 
Search this Thread
 
  #11  
Old 05-11-2014, 09:53 AM
DRam's Avatar
Very Honorable Most Senior Member :)
Join Date: Jul 2005
Location: Central Montana, USA
Posts: 769
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by DDrizzle
Ok so the problem is fixed and she fired right up. I charged the battery checked all the fuses. The main 30a fuse was blown but I had replaced that and it still didn't start. I checked the coils they were fine. So I traced it all the way back to the ignition module and it tested fine. So I plugged it back in and she fired right up. I don't if unplugging and plugging the ignition module reset something but she runs like a top with fresh plugs, air filter, and fluids. Thanks guys for the help!

On a side note does anyone know what size the 4 air intake ducts are so when I rip out the air box and replace it with cones on the carb I can get the right ones. I believe they are 60mm but I'm not sure. Can anyone confirm?
If there was corrosion in the ignition module plug other connectors may be corroded also. You might want to get some contact cleaner and clean every connection you can find.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
baseballkid
CBR 600F4
3
10-04-2012 07:48 AM
donnygeewebb
F4i - Main Forum
19
01-05-2012 09:00 PM
SAXON
CBR 900RR
2
03-19-2009 04:01 PM
marty2900
CBR 600F3
3
07-26-2007 11:57 AM
PitbullF4i
General Tech
10
07-01-2006 01:01 AM



Quick Reply: Switched plugs now no spark



All times are GMT -5. The time now is 04:35 PM.