Some of you guys asked so here it is
#11
#12
#13
RE: Some of you guys asked so here it is
Did a deep clean while I was at it, and fixed little cracks in the plastics I use gorilla glue on the inside with misc plastic pieces that I had laying around came out good and strong
[IMG]local://upfiles/20246/8B66AA6800B24C2E8AEB1A15C37B58B6.jpg[/IMG]
[IMG]local://upfiles/20246/8B66AA6800B24C2E8AEB1A15C37B58B6.jpg[/IMG]
#14
RE: Some of you guys asked so here it is
Back to the project at hand you should be able to mount the tail section back on easy. For the front two mounting points mine lined up with the frame, get some self taping metal screws, drill a pilot hole and screw to frame. All the time your doing this you should be taking the front seat on and off to make sure everything is mounting right.
#15
RE: Some of you guys asked so here it is
Front seat will go into existing notch and not come off without some wiggling rear seat I zipped tied down and used rtv sealant cause it will hold it in place. I ride solo all the time but every once in a while she wants to go for a ride, to test the rear strength I put 150lbs of plates in my bag and mounted it on the back of the bike and went for a cruz then measured. There was no drop in height and it feels strong. You can see from the pic whereI cut the side plastics. I would not put another guy on the back or any Fatties REPEAT NO FAT CHICKS. I never go over 110 120.
[IMG]local://upfiles/20246/A048F9D4CBA341CFA94703B2545AFEE9.jpg[/IMG]
[IMG]local://upfiles/20246/A048F9D4CBA341CFA94703B2545AFEE9.jpg[/IMG]
#16
RE: Some of you guys asked so here it is
For rear lighting I got a Led brake/turn light from auto parts store 29.99 and it fit perfect in th etail looks like it was made to go there. And I used recessed turns I already had
[IMG]local://upfiles/20246/F9BA9FD4E134417DB985A6739FDDDF1C.jpg[/IMG]
[IMG]local://upfiles/20246/E1895563DA3C45CB99D4B59861897987.jpg[/IMG]
[IMG]local://upfiles/20246/F9BA9FD4E134417DB985A6739FDDDF1C.jpg[/IMG]
[IMG]local://upfiles/20246/E1895563DA3C45CB99D4B59861897987.jpg[/IMG]
#17
#18