Picked up my 2nd '87 Hurricane 1000 yesterday.
#1
Picked up my 2nd '87 Hurricane 1000 yesterday.
Have owned my 1st since 1989. The 2nd one is not running even though the buyer said it had last run 1 yr ago. W/out too much detail I got a surprise when I got home and began digging. The 2nd was bought for one piece of bodywork and then I planned to sell it immediately, but before i do i want to see if it does start since that would help resale.
My issue is the starter relay will not click when starter button is pressed. Relay is getting power, however there is no power on the starter motor side. Relay is good because it worked on the other bike. Thoughts?
My issue is the starter relay will not click when starter button is pressed. Relay is getting power, however there is no power on the starter motor side. Relay is good because it worked on the other bike. Thoughts?
Last edited by Neal; 12-05-2010 at 03:37 PM.
#2
Guest
Posts: n/a
If you have power going into the relay and nothing coming out?? ..... gee , you would think that it is the issue ?? definitely a strange one ??
Prolly a stupid question , but have you checked all your fuses? and checked to see if any power is getting to the starter at all ...?
May be check to see if power is actually going through the starter switch...
Is the Side stand switch working ok ?
Welcome to the CBRF
Prolly a stupid question , but have you checked all your fuses? and checked to see if any power is getting to the starter at all ...?
May be check to see if power is actually going through the starter switch...
Is the Side stand switch working ok ?
Welcome to the CBRF
Last edited by CBRclassic; 12-05-2010 at 02:40 PM.
#8