Where is the fuel relay at cause I notice my pump won't even kick on

 

It's tucked in by the pump. I had a hard time because it was not intuitive that the fuel relay would affect ignition. I'll get a pic up for you tonight.

 

Ok thank you

 

The solenoid was my first thoughts. It can click and not make a good connection also. Bypass it with jumper cables or go from battery (+) to starter (+) and see if she will turn over. The dimming of the lights is actually a good sign, it means that the start button is working.

 

Ok just replayed fuel pump relay it kicks on now but still won't turn over if I do it by jumping the starter no problems it turns over so I think the starter cylinoid is bad

 

A bad starter cylinoid would not stop it form having spark would it should I look for another issue for my spark problem or could this fix it ?

 

Make sure you didn't blow the ignition fuse after replacing the relay. There's a 10 amp in the fuse panel and a 30 in the solenoid.

 

I checked all fuses and there all good

 

+1 your starter relay/solenoid

swap it with the other bike

 

Ok new ? I just found out the org 88 motor only has 2 wires from Crank sensor mine has a 94 1000motor in it with 4 wires would this stop it from starting or getting spark and if so is there a fix to this