need a part but dont know what to call it lol
#1
need a part but dont know what to call it lol
so theres the main fuel feed hits a brass "T" fitting then from there those two lines feed to plastic o ringed "T" fittings in between carb 1 2 and carb 3 4
are those plastic "T"s common at motorcycle parts stores or will i have to order them
also there are small plastic "T" fittings in between 1 2 and 3 4 i want to know where those run like hose obviously goes to them but where do they go lol
any help would be appreciated
are those plastic "T"s common at motorcycle parts stores or will i have to order them
also there are small plastic "T" fittings in between 1 2 and 3 4 i want to know where those run like hose obviously goes to them but where do they go lol
any help would be appreciated
#2
www.carlsalter.com
or
www.blackbears.ru
Download a manual
I moved your post here......
You can order parts from www.bikebandit.com
or
www.mrcycles.com.
I have used mr cycles, their website has pictures, part numbers and prices.
or
www.blackbears.ru
Download a manual
I moved your post here......
You can order parts from www.bikebandit.com
or
www.mrcycles.com.
I have used mr cycles, their website has pictures, part numbers and prices.
#4
Yep, you'd have a hard time finding some of those parts at stores. I'm sure it can be done, but probably much easier to use Mr. Cycles. I've also ordered from them and they're pretty good about stuff.
Probably running various vacuum actuated components or evap or something. Could also be drains, I can't remember what all is in there.
I'd just trace them and see where they go.
also there are small plastic "T" fittings in between 1 2 and 3 4 i want to know where those run like hose obviously goes to them but where do they go lol
I'd just trace them and see where they go.
#6
Guest
Posts: n/a
It really helps if you spend quite a few hours going over the manual getting familiar with all the bits and bobs that make these CBR's tick ....
Then parts that look like they come from bloody Mars and seem to do jack chit , will make sense to you ...
Last edited by CBRclassic; 12-30-2010 at 03:25 AM.
#10