any tips ????
#2
![Default](/forum/images/icons/icon1.gif)
Start with putting the CBR on the centre stand.
1. Remove the nut from the axle.
2. Push the brakepads apart with a large screwdriver so the dont squeeze the rotor.
3. Pull the axle out. Might need light force.
4. Move the wheel frontwards so you can unhook the chain from the sprocket.
Done!
1. Remove the nut from the axle.
2. Push the brakepads apart with a large screwdriver so the dont squeeze the rotor.
3. Pull the axle out. Might need light force.
4. Move the wheel frontwards so you can unhook the chain from the sprocket.
Done!
Thread
Thread Starter
Forum
Replies
Last Post