Custom CBR 600 F3 Fresh from the paint shop
#1
Custom CBR 600 F3 Fresh from the paint shop
Check out the pictures of my bike. Its fresh from the shop. When I got my bike shipped here to koreait was damaged during the trip. The airline covered the damaged so I decided to get it painted. I went with the EuroFireblade wings. This paint job goes sweet with the custom R1/F3 upper Imadefor the bike.
Soon I hope to have a fairing made to take to the factories around my home to see if I can get these things
reproduced. So I will keep updating the site on my progress in order to make these fairing available to those that wish to purchase one.
[IMG]local://upfiles/6966/312ED300A9E44772B254E5759030F438.jpg[/IMG]
Soon I hope to have a fairing made to take to the factories around my home to see if I can get these things
reproduced. So I will keep updating the site on my progress in order to make these fairing available to those that wish to purchase one.
[IMG]local://upfiles/6966/312ED300A9E44772B254E5759030F438.jpg[/IMG]
#2
#3
#6
RE: Custom CBR 600 F3 Fresh from the paint shop
Thank you for the compliment. Well the bike is still pretty much stock. I have dont alot of cosmetic work to the upper fairing. The swingarm was changed out for a VFR 750 single sided swingarm. Since the swingarm had a little space I decide to run a undertail
pipe beside it and up under the seat. I installed a K AND N airfilter along with stiffer frok springs. Also I installed the F4I gauges because of the new upper fairing. That pretty much it.
pipe beside it and up under the seat. I installed a K AND N airfilter along with stiffer frok springs. Also I installed the F4I gauges because of the new upper fairing. That pretty much it.
Thread
Thread Starter
Forum
Replies
Last Post