F4I Projector Retro-fit
Thread Starter
|
Banned
Joined: Sep 2010
Posts: 22
Likes: 0
F4I Projector Retro-fit
I have researched and really never seen anyone with projectors in our bikes. So i decided to Retro-fit some 2008-2010 Infinity G37 Bi-Xenon projectors into my bike this weekend. So I gathered the parts and went to work. Made mounting plates and used the stock adjusting plates so i have full light adjustment. I also wired the low beams so both lights are on all the time, and when i hit the switch on the bars both switch to high beam as well. Also i put on a separate switch a set of Blue LED's that line the housing. "The pics dont do it justice, They are much bluer in person" Its goin pretty well so far. Here's some pics of what we have. Let me know what you think.
Thread Starter
|
Banned
Joined: Sep 2010
Posts: 22
Likes: 0
Thank you, I got the projectors from eBay. and then ordered some D2S bulbs and Ballasts for the HID's. There's 3 adjusting Screws on the back of the housing.
Thread Starter
|
Banned
Joined: Sep 2010
Posts: 22
Likes: 0
The LED's were cake. just unseal the lense and lay em in with some epoxy. Hold real strong and it drys clear. Ya ive seen a bike like that. i thought it would look cool but decided against it.
Thread Starter
|
Banned
Joined: Sep 2010
Posts: 22
Likes: 0
Haha thanks, Im hopping people like it when its done. I ordered a strip of LED's off line they are 72cm long, I wired em to the battery with a switch within hands reach on the bike so i turn em on and off as i please.