F4i - Main Forum Main F4i discussion board

starting problem help !

Thread Tools
 
Search this Thread
 
Old Sep 5, 2008 | 10:07 AM
  #1  
Jay1623's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 42
Likes: 0
From:
Default starting problem help !

i have a new battery charged and ready.it was starting up at first then i let my cuzin ride and he stalled out.when i went to start it it didnt start.The lights would be on then when i go to start it they would turn off no noise just doesnt start.
 
Reply
Old Sep 5, 2008 | 10:12 AM
  #2  
F4iMane's Avatar
Senior Member
Joined: Aug 2008
Posts: 311
Likes: 0
Default RE: starting problem help !

might sound silly but when your cousin stalled did you have the kickstand down and it still in gear?
________
Sophiexx
 

Last edited by F4iMane; Sep 9, 2011 at 05:49 AM.
Reply
Old Sep 5, 2008 | 10:18 AM
  #3  
Jay1623's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 42
Likes: 0
From:
Default RE: starting problem help !

no kickstand was off
 
Reply
Old Sep 5, 2008 | 10:55 AM
  #4  
drdrewdown's Avatar
Member
Joined: Aug 2008
Posts: 67
Likes: 0
From: midwest
Default RE: starting problem help !

it just clicks or wot? i would assume the kill engine switch is in the KILL position if you aren't getting ANYTHING?!!??

play with that red switch on the right handlebar ;D
 
Reply
Old Sep 5, 2008 | 11:05 AM
  #5  
Jay1623's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 42
Likes: 0
From:
Default RE: starting problem help !

no clicking or anything it just doesnt start the light is on but when i go to start it it turns off
 
Reply
Old Sep 5, 2008 | 11:10 AM
  #6  
Xuracing's Avatar
Senior Member
Joined: Jul 2008
Posts: 689
Likes: 0
From: Pittsburgh
Default RE: starting problem help !

check your kick stand sensor again. common issue
 
Reply
Old Sep 5, 2008 | 11:17 AM
  #7  
Jay1623's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 42
Likes: 0
From:
Default RE: starting problem help !

xuracing u sure is dats it b/c it started and worked well,but den my cuzin got on i was trying to teach him how to get out for first gear and he stalled out then when i go to start it again that problem happen i dont want to take it to a shop yet i wanna hear from the forums first cuz u guys kno bikes very well
 
Reply
Old Sep 5, 2008 | 12:32 PM
  #8  
Jay1623's Avatar
Thread Starter
|
Member
Joined: Aug 2008
Posts: 42
Likes: 0
From:
Default RE: starting problem help !

bump plz help me
 
Reply
Old Sep 5, 2008 | 09:52 PM
  #9  
drdrewdown's Avatar
Member
Joined: Aug 2008
Posts: 67
Likes: 0
From: midwest
Default RE: starting problem help !

can you push start it?

 
Reply
Old Sep 5, 2008 | 10:50 PM
  #10  
FLYOU's Avatar
Senior Member
Joined: Jul 2007
Posts: 2,246
Likes: 1
From: Columbus, OH
Default RE: starting problem help !

Things I would check (In this order).

Bank Angle Sensor - Reset
Fuses - Check (don't believe the bike will allow itself to start itself with a blown fan fuse)
Fuses - Try starting without the headlight fuse (seperate wiring harness problem. easy fix)
ECU - Dielectric grease/clean
Kickstand Switch (dielectric grease)

weird jolts like that will cause corroded connection pins to get disconnected. it's happened to me many times. buy some grease and lube up.
 
Reply



All times are GMT -5. The time now is 08:38 PM.