Can anyone take a picture of there CDI (IC module) so i can put my wires in the new one i orderd so i dont short circut this one. It is located under the far upper right cowl by the seat. I need a picture so i can finally go out riding again. This suck not being on the road on an oldy but thanks ahead of time

 

If I remeber rightthe connector(s) to the ECU are mechanically coded, i.e.they can only be pushed in so they are correctly connected.

 

i dont know about that i couldnt tell you if my wires are messed up but they all fit in each spacing on the CDI ill put a pic up of the new cdi and let you take a look at it. But if you can still get me a pic (if you know anyone that can get me an acctual picture that would help out great)

Oh and R1000 thanks for the sprocket i just got it in.

 

Good the sprocketgot thru.Hopefully some fellow will take the pics you need. I don't have a 1KF here anymore and can't help with pics. There are som good picture (drawn) in the service manual that have been possible to download in this forum and was posted by member Trips from down under. It also includes a scematic and test procedures for connections to the Ignition Control Module. https://cbrforum.com/m_123412/tm.htm



[IMG]local://upfiles/4562/643C48CB3EA649D3921A8DF8918C0F49.jpg[/IMG]

 

Hi , took a picture of my cbr1000f -89 !
If you mean the "spark unit" as it's said in Haynes workshop manual then here you are(it's placed where you described).
Note.Not the best focus,my camera is not that good.


[IMG]local://upfiles/18306/45E98F7DEF454F338EB046879502D99C.jpg[/IMG]

[IMG]local://upfiles/18306/8BF0617CA6D24E7FBB586A5675269962.jpg[/IMG]

 

HELL YEAH!!!!!!! Thanks BLUE1000F that was exactly what i was looking for the picture quality might be bad but it shows me exactly what i needed to know now soon as i place the wires all in i will let you know how it runs. Oh and if you know anyone that is looking for cheap parts that work and are tested with a 1yr warrenty i found a good place in (PA) u.s.a that delievers where ever. Its a motorcycle salvage yard and it indoors to keep the rain off the bikes and its huge i just got back from there like 2 hrs ago and they have any and all types of bikes you name it they have it well thanks again.

 

Hey R1000, what did you use to capture that screen image? It could come in handy sometimes.

 

The <PrnScn> key will capture the screen to the clipboard, then you can paste it to whatever you want.

Use the Microsoft XP PowerToys - Image resizer (from the Microsoft website) to resize the image to a smaller size, or you can use Microsoft Paint (comes with Windows); Corel Photopaint; Adobe Photoshopor one ofmany other imaging apps to resize or mess with the image.

 

Thanx. You learn something every day.

 

well with the new vista edition of windows you have to download that after windows is already installed how gay is that