bobbed 93 cbr f2 streetfighter build
 

hey im new to motorcycles and this forum. this is the first street bike i owned but i been riding dirtbikes for over ten years now. i had to buy a bike after helping my friend build his f4 streetfighter. i come from the world of drag racing and i have a twin turbo ls1 s10 i built myself so fabrication isnt new to me so i wasnt really afraid to dive into these bikes. i didnt know anything about cbr's before this all started. i have learned a ton in the process of building two bikes and wasnt affraid to wing things and start taking things apart.

heres my friends cbr we built in a few weekends.

Attachment 33559

anyway, my bike is a 93 cbr 600 f2. i picked this bike up for $1500 and it ran ok but the fairings were junk. i did not care because i was taking them all off anyway. this isnt the actual image of my bike, but it looked exactly like this same color and everything when i first got it.

http://i93.photobucket.com/albums/l7...ps830f49bf.jpg

instantly started ripping things apart and getting to work. it backfired on de accel and was running a little rough so i figured i would go through all the maintenance on the bike to make it run like new again. i busted ass to finish this and built the whole thing within two weekends so i didnt get too many pics but here you go.

Attachment 33560
Attachment 33561
Attachment 33562
Attachment 33563
Attachment 33564
Attachment 33565

<iframe width="560" height="315" src="http://www.youtube.com/embed/8CW9GEqwGm8" frameborder="0" allowfullscreen></iframe>

heres a list to everything that was done to it:
carbs cleaned
new ngk cr9 plugs
k&n air filter
amsoil synthetic 10w-40 motorcycle oil
6.5" springer headlight
trailtech vapor stealth guage
custom dynamics integrated led taillight
new pilot power 3 160/60-17 rear tire
new continental front tire
led blinkers (front)
led taillight lights
08-11 1000rr seat
chopped/welded subframe
wrapped header
chopped yoshi pipe
everything is painted low gloss black with dupli color engine enamel
besides that everything is stock, bike is plenty fast for me

and thats all i got for now. once i get it inspected and registered next week ill have much better pictures and more videos. its snowing like crazy right now so i cant even ride it yet. it runs very good now and it was a fun learning experience and i cant wait to go riding.

right on man, that thing looks great. nice choice of seat.


any other plans for it?

Thanks. Im thinking about switching to an f4i motor one of these winters. Im not a fan of carbs and prefer the extra effort in wiring and tuning capabilities in fuel injection. Ill probably take some parts off and get them powdercoated too. Im not expecting this spray paint to last a life time haha

Maybe this link will work
http://m.youtube.com/#/watch?feature=plcp&v=8CW9GEqwGm8

that looks extremely similar to mine!

Haha thats funny you posted this because i basically based this entire bike off of your build thread. I saved pictures of your bike and tried replicating it the best i could because i loved the way you did the chopped tail with the 1000rr seat and i love the taillight you have. Your bike has been the main motivation and by far the most inspirational for me. To be honest if my friend never showed me your bike mine wouldnt look nearly as good.

that's awesome. I'm flattered :icon_toast:

Haha i didnt want to make it sound weird

Put my friends stock muffler back on for now to pass inspection. It looks hideous but oh well. The trooper will be here in 30 minutes so im keeping my fingers crossed