Hey guys and gals.

I've been slowly rejuvenating my cbr600f3, and the biggest hassles have been hose routing and wiring.

Yes I should have taken pics before I pulled it apart.
Shame on me.
I have a workshop manual, as well as a PDF of the factory Honda manual.

Both are pretty useless for this.

I have everything plugged in under the seat, but I have a few strays under the dash.
For the life of me, I cannot find plugs to match on these last 2.

I plugged in the battery just now to see whats working.
Dash lights, check
Headlight and tail light, check
Indicators, check
Horn. check
Motor turns over, check

I didn't hear the fuel pump at all, but then, the wires for that are under the seat, not up front.

Sorry for the crappy pics. Here's a short clip to maybe see what I mean better.

HELP!!

https://www.youtube.com/watch?v=rznK...ature=youtu.be

 

Hi matey ,been checking out the wiring diagrams for the first picture, the only thing I can come up with for that combination is Position Light, Green and Brown wires, But that's only on the 87-91, what colours go into the other connectors?

 

I will take a look at my 98 and see if I can help. BTW, the fuel pump only comes on after the bike has started on this generation. If want to test it to be sure, there a procedure in the service manual. I'll look it up and give you the page numbers when I get the manual in my hands.

 

Page 18-16 of the Honda Service Manual gives you the instructions on how to test to see that the fuel pump is working without the bike running.

 

This is what my connection rail looks like. To the best of my knowledge, it's the way it was when it left the factory. I'm still looking for the 2 wire connector you show in your hand.

 

CaBaRet
I will get the bike outside for a better pic.

Thanks for the pic and manual advice hamlin

The problem with the leftover connectors is that there doesn't appear to be anything to plug them into at all.
I don't know if they're redundant from the factory or not.
Just seems strange to me.
All the plugs are color coded and size matched for each other, so I cant really stuff it up.
Well, its possible lol, but it all looks right.

 

new vid, much better view

 

Hi , just wondering did you get a new harness to rebuild your bike, and I think you have said that all lights front/back work ,indicators work and headlight works, is that correct

 

Hi
No new harness.
I undid it all as I re-painted the chassis while the engine was still in.
Just to get rid of rust, not really a cosmetic thing.
Also, the front fairing stay was twisted and bent to one side as well, so all the wiring had to come out.
Kicking myself for not taking notes/pics, and labeling the wires.

Yep, all lights work, indicators and horn, as well as dash lights

 

here's the mess I made to give you an idea lol