Cbr1000rr 2008 clutch replacement (updated version)
Thread Starter
|
Junior Member
Joined: Nov 2023
Posts: 3
Likes: 0
Cbr1000rr 2008 clutch replacement (updated version)
Hello guys,
im in a situation, i replaced my original for a ebc racing clutch kit, first i used the orginal 08 workshop manual( incorrect) after some digging i found out about the recall. So i mounted is as displayed in the 2013 manual (updated version).
Now i still have a slipping clutch, not as bad as last time but noticeable, how can i get rid of this. How far does the cablemount needs to be turned on the crankcase cover, or did i forgot something?.
jugger spring and diavragma springs are new and even the last friction plate is in is own place (as in the manual). Hope someone can help me because it frustrating.
Bike have 27k km on it and rode like a rocket
im in a situation, i replaced my original for a ebc racing clutch kit, first i used the orginal 08 workshop manual( incorrect) after some digging i found out about the recall. So i mounted is as displayed in the 2013 manual (updated version).
Now i still have a slipping clutch, not as bad as last time but noticeable, how can i get rid of this. How far does the cablemount needs to be turned on the crankcase cover, or did i forgot something?.
jugger spring and diavragma springs are new and even the last friction plate is in is own place (as in the manual). Hope someone can help me because it frustrating.
Bike have 27k km on it and rode like a rocket
Thread
Thread Starter
Forum
Replies
Last Post
