Hey guys just got this. Wiring on the bike is all set for an LED tail. I just need to know what goes where. Here are some pictures.



Here is the tail light itself. Got it off of ebay.



Two wires coming out one is yellow one is blue.



Three wires coming out of the other side into this clip. One red, one yellow, one black.



These came in the package too. No idea what they are.

Any help is appreciated. The bike is a 2000 F4.

 

Those white things are resistors to slow the blink rate down. Because the LEDs are different than incandescent bulbs the bike thinks that the bulbs are burned out, so they blink faster. They get really hot, so if you use them make sure to mount them away from anything that can melt.

The two wires, yellow and blue, are for the blinkers. Tap these into the stock turn signal positive wires, and hook up the resistors.

The other 3 wires with the clip should just plug into the stock socket. Black is usually ground, yellow and red are brake and running lights.