So i new this street bike scene and just can't seem to get this bike running right. So here it is. It is stalling when cold anything below 150 degrees can't ride or it will stall at deceleration. I changed the map sensor,fpr, and cleaned the injectors and throttle body. Now when sitting parked it will flood and I have to unflood it to get it started again.. Any help will be appreciated. I read somewhere else that someone had the same problem and it wound up being valves needed adjustment. if it is that what am i looking at cost on that?


mark

 

you put a new fuel pressure regulator?

 

How were they cleaned? Flooding when the bike is **** off suggests injectors sticking open.

 

did you buy a used FPR?