01-03 F4i Custom integrated tail's FS!
#1
01-03 F4i Custom integrated tail's FS!
THERE IS ONLY ONE TAILLIGHTS LEFT! ONCE IT IS GONE THERE WILL BE NO MORE PRODUCED! $160 SHIPPED!
If you get the last tail light, i will include a strobe module for $15!
It takes a lot of work to make these and i am making nothing off them at this price.
Once its gone, its gone!
They will be in the stock red housing, im running the red one now too, the red leds show up even brighter!
They cost a little bit more than expected to make, but hopefully after i expand to other bikes the price will go down cause im buying so many LED's and PCB boards.
The new tails will be brighter than the tail i took pictures of, i got some 45000 MCD led's...This one was made with 13000 MCD..So the one you get will be much brighter.
It will be a very easy install on your part. All you need to know is the color of your brake wire, signals, running light, and ground. I will write install instructions..so dont worry.
With a comparison with the new taillight and a clear alternatives, there are several things to notice:
1. When a signal is turned on, the brake light for that side only turns off, making the signal much more visible
2. The LED's used in the clear alternative have about a 12-20 degree viewing angle(about the same viewing angle as the pictures below), this has around 140 degrees, also the output of the clear alternatives LED's is rated much lower than the 45,000 MCD of mine
3. There are about 40 LED's total in the clear alternatives TOTAL, there are over 100 in mine
Heres some pics:
45 Deg Viewing angle VS Ebay Tail:
Straight behind:
After the 01-03 F4i light takes off, ill expand to other bikes, whatever anyone needs really. Everything i make is going to go right back into it to help make more for other bikes.
Thanks!
If you get the last tail light, i will include a strobe module for $15!
It takes a lot of work to make these and i am making nothing off them at this price.
Once its gone, its gone!
They will be in the stock red housing, im running the red one now too, the red leds show up even brighter!
They cost a little bit more than expected to make, but hopefully after i expand to other bikes the price will go down cause im buying so many LED's and PCB boards.
The new tails will be brighter than the tail i took pictures of, i got some 45000 MCD led's...This one was made with 13000 MCD..So the one you get will be much brighter.
It will be a very easy install on your part. All you need to know is the color of your brake wire, signals, running light, and ground. I will write install instructions..so dont worry.
With a comparison with the new taillight and a clear alternatives, there are several things to notice:
1. When a signal is turned on, the brake light for that side only turns off, making the signal much more visible
2. The LED's used in the clear alternative have about a 12-20 degree viewing angle(about the same viewing angle as the pictures below), this has around 140 degrees, also the output of the clear alternatives LED's is rated much lower than the 45,000 MCD of mine
3. There are about 40 LED's total in the clear alternatives TOTAL, there are over 100 in mine
Heres some pics:
45 Deg Viewing angle VS Ebay Tail:
Straight behind:
After the 01-03 F4i light takes off, ill expand to other bikes, whatever anyone needs really. Everything i make is going to go right back into it to help make more for other bikes.
Thanks!
Last edited by redzintimidator; 08-17-2010 at 09:28 PM. Reason: added information
#8
Well, if i get enough people that pre-order em, i can get a batch made. Pretty much any bike, i probably just need 5 or more orders before i can get a batch of boards made cause they are expensive as hell! Its not so bad to get them, its getting the money to get them without knowing they will sell.
#10
Im actually kind of ashamed on the brightness of the first one...Bottom is the first light i made, top is one of the second gen ones i am producing...wow! Its about 3 times as bright as the first one i made. I think this thing is brighter than the stock light!