Below is the link to an informational website that I put together that hopefully helps folks understand how to improve seat comfort without spending hundreds of dollars.

www.diymotorcycleseat.com

My **** has often started hurting within 45-60 minutes of riding on every stock seat I've tried, including my F3. On those seats I was also typically sliding up against the tank and just didn't feel it fit me well. I didn't want to spend hundreds of dollars on an aftermarket seat to fix this problem, only to find out that didn't do the trick either. Based on experience doing my own seat modifications, along with research I've done, I put together www.diymotorcycleseat.com to hopefully help others deal with these issues.

The mods that I've made to my seats -- which typically have cost me about $50 -- have allowed me to ride hard for 10-12 hours without **** pain. I definitely have other pains here and there (I'm getting old), but at least the seat essentially has been removed as an obstacle to riding more. And riding more equals living more!

Please let me know if you have any suggestions, comments, anything.

Thanks and hope it useful. [/align]

 

http://11109.rapidforum.com/topic=10...search=spencer

Someone turned me onto this. I'm going to get a hold of him and send minr out soon if he'll do it. Would be happy to right up a report if you want. Was going to do it my self, but he's price is good enough not to bother.