F4i - Main Forum Main F4i discussion board

superbike spec F4i!

Thread Tools
 
Search this Thread
 
  #31  
Old 10-28-2007 | 08:59 PM
rolandk's Avatar
Senior Member
Joined: Jul 2006
Posts: 280
Likes: 0
From: Portland, Oregon
Default RE: superbike spec F4i!

Just out of curiousity, why not a 600RR? Its the top rated 600 and you could find anew or used'07 pretty cheap.
 
  #32  
Old 10-28-2007 | 09:13 PM
woodyracing's Avatar
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 1,327
Likes: 0
From: Meridian, MS
Default RE: superbike spec F4i!

The 07 RR is the best 600 of 07 but its more expensive, contingency sucks, parts are expensive (HRC parts are ungodly expensive and nearly impossible to actually get), no slipper clutch doesn't help, and they aren't very popular in club racing so its more difficult to buy/borrow spare parts in case of a crash, etc. I've also heard that a lot of people are having trouble finding the right geometry set-up for the RR. If I were just wanting a street or trackday bike it would definitely be my top choice but for racing I've gotta go with Yamaha or Suzuki.

all that and the local shop that I would have to get it from still hasn't gotten any 07 RRs in yet and don't know when they will. Its really f'ed up, they had one 06 600RR that they wouldn't sell for a penny less than the 06 MSRP so they just let it sit in their shop this entire year and didn't get any 07 600RRs because of it. They just sold that 06 and are going to be waiting on the 08s to come out but they're giving me the impression that they aren't going to be getting any before spring. I could get the RR somewhere else but obviously I'm not going to be able to walk into an out of town dealership and get a bike for much less than MSRP and there's no way I'd get it for close to dealer cost.
 
  #33  
Old 10-29-2007 | 10:27 AM
Jaybird180's Avatar
Senior Member
Joined: May 2006
Posts: 3,477
Likes: 2
From: Prince George's County, MD
Default RE: superbike spec F4i!

Go with the Gixx. I've heard stories from a local wrench about Yamaha motors (R6 and R1) blowing up. GSXR's are still cracking frames though, so it's tough.

Think you can find that article on ceramic bearings? .2 seconds is a lot.
 
  #34  
Old 04-03-2008 | 03:14 PM
Jaybird180's Avatar
Senior Member
Joined: May 2006
Posts: 3,477
Likes: 2
From: Prince George's County, MD
Default RE: superbike spec F4i!

Where are you on this Woody?
 
  #35  
Old 04-03-2008 | 03:39 PM
woodyracing's Avatar
Thread Starter
|
Senior Member
Joined: May 2006
Posts: 1,327
Likes: 0
From: Meridian, MS
Default RE: superbike spec F4i!

sold the F4i and bought a CR85 mini motard
still regret letting go of the F4i but the motard is unbelievably fun

planning to get an 08 R6 in 09 to race in 09/2010 but thats a pretty good ways off

never did find that ceramic bearing article, sorry
 
  #36  
Old 04-03-2008 | 05:02 PM
Stephens's Avatar
Senior Member
Joined: Feb 2006
Posts: 1,640
Likes: 0
From: Kearney, Nebraska
Default RE: superbike spec F4i!

Nice bike bro, if I didnt have a baby on the way. I would be on my way to MS.
 
  #37  
Old 04-03-2008 | 06:40 PM
ReSpEcT's Avatar
Senior Member
Joined: Sep 2007
Posts: 390
Likes: 0
Default RE: superbike spec F4i!

R1 front end swap looks alot sexier on the F4i compared to most other swaps...I think its just the look of those black forks, hehe.....=-)
 
  #38  
Old 10-04-2009 | 07:40 AM
woot's Avatar
Senior Member
Joined: Jul 2006
Posts: 1,127
Likes: 1
From: NS, Canada
Default

I found this thread a full 2 years after... I like you love my current bike - the F4. Same frame as yours, slightly different rear subframe and slightly different brakes on the front. Otherwise - pretty similar handling characteristics.

I'm currently riding an F4 - did a few track days - did the school - and now am hooked. I'm lucky in that we have a sportsman class for 10 year old bikes - meaning the F4 is a perfect match for the class.

So I'm starting to build it up - I'm looking for lots of parts on a tiny budget. At the moment my feeling is the rear shock will give me the most gain.

If you remembered much of your setup, or what parts you found gave the biggest gain on the bike I'd always be interested.

My biggest complaint is that it doesn't seem to want to turn in. There are a couple of turns where the bike feels a mile long. It has been suggested at the track I beef the rear suspension up, and add some ride height to the rear. Hopefully that'll keep the back from squatting so much which I think is causing it to lift the front and causing the front to want to shimmy/slap on the back straight.

My current shopping list includes:

- rear shock
- valved forks
- F4 rims/rotors for spares (f4i wheels were different I think)
- damper (rough track and with the rear suspension as it is the front is getting slappy at times)
- tire warmers
- tires (so many tires )
- rear sets... although may become moot with the new rear suspension


I've already got the motor setup with K&N and a full M4 system... seems to be running well for amateur level racing anyhow.

Thanks for any help you can offer!
 
  #39  
Old 10-04-2009 | 09:22 AM
mikeswe's Avatar
Junior Member
Joined: Sep 2009
Posts: 29
Likes: 0
From: Sweden
Default

Originally Posted by woot
So I'm starting to build it up - I'm looking for lots of parts on a tiny budget. At the moment my feeling is the rear shock will give me the most gain.

If you remembered much of your setup, or what parts you found gave the biggest gain on the bike I'd always be interested.

My biggest complaint is that it doesn't seem to want to turn in. There are a couple of turns where the bike feels a mile long. It has been suggested at the track I beef the rear suspension up, and add some ride height to the rear. Hopefully that'll keep the back from squatting so much which I think is causing it to lift the front and causing the front to want to shimmy/slap on the back straight.
I'm also in the process of modifying my 2002 FSport (F4i) for track riding. I read on another forum that one way to improve the handling is to put shims between the shock upper mount and the frame. They recommended a 4mm spacer, I don't know what that will do with ride height but I guess around 25-30mm. Worth trying, the standard shock is of decent quality and it's very expensive to get an aftermarket one.
 
  #40  
Old 10-05-2009 | 03:56 PM
hondajunkie's Avatar
Official Welcome Crew Junkie
Joined: Jan 2007
Posts: 2,658
Likes: 2
From: Tinley Park,Illinois
Default

Holy underwear!!
What an old thread!
 


Quick Reply: superbike spec F4i!



All times are GMT -5. The time now is 05:47 AM.