Parts source in Europe
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 14
Likes: 0
From: The Netherlands
Parts source in Europe
I was searching for a set of injector O-rings (16010MCJ003) but cannot find any worldwide! Honda doesn't sell them anymore. 
Does anyone know the specs of these rings, so I can get them anywhere else in Europe?
Does anyone know the specs of these rings, so I can get them anywhere else in Europe?
Senior Member
Joined: Jul 2023
Posts: 466
Likes: 124
From: UK,East Midlands
Partzilla is showing 16472-MCF-003 for the 2005 CBR600F4i and has then in stock :-
https://www.partzilla.com/catalog/ho.../throttle-body
Senior Member
Joined: Jul 2023
Posts: 466
Likes: 124
From: UK,East Midlands
Senior Member
Joined: Jul 2023
Posts: 466
Likes: 124
From: UK,East Midlands
Odd, it shows it as in stock from here unless I'm looking at totally the wrong part, the o ring on the injector, part no 10 on the page I linked to?
Last edited by Ed Harris; Aug 25, 2024 at 03:34 PM.
Thread Starter
|
Junior Member
Joined: Aug 2024
Posts: 14
Likes: 0
From: The Netherlands
No, it's number 2. A set of 4 O-rings at the front and 4 at the back of each injector.
Number 10 are rings for the starter valves, which happen to be unavailable at Partzilla.
Number 10 are rings for the starter valves, which happen to be unavailable at Partzilla.
Senior Member
Joined: Jul 2023
Posts: 466
Likes: 124
From: UK,East Midlands
I apologise for the typo, I meant part number 16. - I hadn’t realised you needed part 17 as well.
Welcome crew
Joined: Jan 2021
Posts: 2,573
Likes: 426
From: Preston, UK
Says available to order here:
https://twowheelsparts.com/gasket-set-16010-mcj-003
you might be lucky
You could also try an o-ring supplier with the dimensions that you need:
https://www.polymax.co.uk/o-rings/
https://twowheelsparts.com/gasket-set-16010-mcj-003
you might be lucky
You could also try an o-ring supplier with the dimensions that you need:
https://www.polymax.co.uk/o-rings/
Last edited by Al1040; Aug 27, 2024 at 10:09 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Revnge_SevnFold
Off Topic
0
Aug 11, 2013 11:03 AM