My Poor F4i... Need Parts
#1
03-10-2015, 12:10 AM
My Poor F4i... Need Parts
Well, last October, a Dodge Ram decided my bike looked better under its bumper and tire in the parking lot. 
I JUST now got the bike back, and needless to say, didn't get anything from insurance. So I am trying to get the bike back RIDEABLE, and then start going back for the cosmetics.
Here is a list of things the bike is going to need to get it back on the road.
New clip ons... 50mm ones because of the 954rr fork swap.
New MSR Clutch lever. Replaced with stock one to get moving around.
New clutch cable.
New Stator cover
New Rear sets... These got bent back enough that they hit the swingarm when suspension is compressed. Also showing signs of stress cracks in them. Did not notice that until recently.
Thats everything it needs to be rideable again, but there was alot of cosmetic damage. Blue powdercoat on the frame is all scuffed. Tail plastics cracked and scuffed. Seat ripped. Custom painted tank dented and rusting.
The fairing kit I am ordering has comes with a tank cover, so going to try that before I do a new tank. I am also looking at doing the RR tail/swingarm swap so those wont be on for long either.
Shipping is killer for parts here in Alaska, so going for the small stuff that can be flat rated here to 99506. Main thing I need to try to find here is the rear sets or clip ons. The lever and cable I will order new from Amazon.
Let me know what you guys have, and what you want for it!
I JUST now got the bike back, and needless to say, didn't get anything from insurance. So I am trying to get the bike back RIDEABLE, and then start going back for the cosmetics.
Here is a list of things the bike is going to need to get it back on the road.
New clip ons... 50mm ones because of the 954rr fork swap.
New MSR Clutch lever. Replaced with stock one to get moving around.
New clutch cable.
New Stator cover
New Rear sets... These got bent back enough that they hit the swingarm when suspension is compressed. Also showing signs of stress cracks in them. Did not notice that until recently.
Thats everything it needs to be rideable again, but there was alot of cosmetic damage. Blue powdercoat on the frame is all scuffed. Tail plastics cracked and scuffed. Seat ripped. Custom painted tank dented and rusting.
The fairing kit I am ordering has comes with a tank cover, so going to try that before I do a new tank. I am also looking at doing the RR tail/swingarm swap so those wont be on for long either.
Shipping is killer for parts here in Alaska, so going for the small stuff that can be flat rated here to 99506. Main thing I need to try to find here is the rear sets or clip ons. The lever and cable I will order new from Amazon.
Let me know what you guys have, and what you want for it!
Last edited by AirmanSkee; 03-10-2015 at 12:12 AM.
#3
03-10-2015, 07:55 AM
Senior Member
#4
03-10-2015, 01:01 PM
#5
03-10-2015, 03:56 PM
Senior Member
#6
03-10-2015, 05:19 PM
Thread
Thread Starter
Forum
Replies
Last Post