My grab bar removal/hole mod
9 Attachment(s)
Well, I searched all over google to find something to cover up the holes that are left in the rear tail section if you remove the grab bar on later model F4is. I found something that might work and ordered some samples (for free, hell they even shipped it to me for free). Anyways, after figuring out I couldn't use them as is, I cut them down and then used weatherstrip adhesive to attach them. After attaching one I read the tube and it read "do not apply to paint." It made a little bit of my paint bubble. Good thing I read directions after application! Anyways I can be the guinea pig. Perhaps you can use blue silicone sealant or something. Will post pics installed after its dry (the adhesive and the stupid weather).
Attachment 79895 Attachment 79896 Attachment 79897 Attachment 79898 Attachment 79899 Attachment 79900 Attachment 79901 Attachment 79902 Attachment 79903 |
RE: My grab bar removal/hole mod
That looks much better than that piece of aluminum that honda puts on there.
Sorry, that was my morning sarcasm escaping. |
RE: My grab bar removal/hole mod
I disagree entirely. I think the grab handle looks better. The mod looks cheap and out of place. At least paint them to match. Using some fibreglass to feather them in might be an idea as well.
I really don't understand why everybody hates on the grab rail so much. Besides looks it's really functional too. I use mine for loading and offloading, mounting rear stands when theres no help around. If I were to ever get a bike without one I fear I'd have to have one mounted! But for most of you looks far outweigh function. But I don't think it looks bad either. |
RE: My grab bar removal/hole mod
I've alway thought about having a fab shop make me one. I would design it and they could make it. I may still do that...
|
RE: My grab bar removal/hole mod
it doesn't look so hot. nice smooth curvey fairing and flat angular pieces dont mix
|
RE: My grab bar removal/hole mod
ORIGINAL: birdstrike I disagree entirely. I think the grab handle looks better. The mod looks cheap and out of place. At least paint them to match. Using some fibreglass to feather them in might be an idea as well. I really don't understand why everybody hates on the grab rail so much. Besides looks it's really functional too. I use mine for loading and offloading, mounting rear stands when theres no help around. If I were to ever get a bike without one I fear I'd have to have one mounted! But for most of you looks far outweigh function. But I don't think it looks bad either. |
RE: My grab bar removal/hole mod
although i agree that i dont think it looks that hot right now, id like to see it with the seat on, i think it might look better
plus, who cares what any of us think? if the owner likes it, they like it...and i must admit it was quitecrafty the way ya did that :) |
RE: My grab bar removal/hole mod
I like it so I don't really care what everybody thinks. I hate the grab bar. I will most likely paint them. Probably use some of the krylon fusion as a primer coat so the honda color will stick. Just sharing for anyone else who feels the same. Flame on.
|
RE: My grab bar removal/hole mod
I will most likely paint them. |
RE: My grab bar removal/hole mod
ORIGINAL: fishfryer527 I will most likely paint them. |
RE: My grab bar removal/hole mod
Hey muck you could be the first f4i to rock a spoiler on the back! I think that there is a neon in my town I could get it off for ya! Or possibly that is where the reverse lights could go when youput it in reverse. But to eachhisown, if you likeit then rock it!
|
RE: My grab bar removal/hole mod
uuhhh....put the grab bar back on dude...
|
RE: My grab bar removal/hole mod
WHAT ARE YOU GOING TO GRAB ON NOW!
|
RE: My grab bar removal/hole mod
ORIGINAL: suicidal WHAT ARE YOU GOING TO GRAB ON NOW! Don't want my bike looking like some mexican american's truck with a boeing 757 wing on the back. Can't you totally tell how much drag that thing is creating? |
RE: My grab bar removal/hole mod
man that banana seat is wack!
i would have left the bars alone. but thats just me |
Paint company options?
Anybody use someone else besides color rite for their paint?
|
RE: My grab bar removal/hole mod (installed pics)
2 Attachment(s)
|
RE: My grab bar removal/hole mod (installed pics)
I had my Honda 599, a company called Rizoma manufactures inserts for the grab bars. I wish they were made for the F4i. Here are the inserts from Rizoma for the Honda 599. Unfortuneately they do not fit the F4i...already checked.
http://www.rizoma.com/IMG/Prodotti/Big/ZHH030A.jpg |
RE: My grab bar removal/hole mod (installed pics)
I like where that key is...looks sweet and functional
|
RE: My grab bar removal/hole mod (installed pics)
Actually, that's a pic of a 919. (I would know cause i owned one. ;) The 599 has the key hole down by the license plate, much like the F4i. But Rizoma makes them for both 599 and 919s.
|
RE: My grab bar removal/hole mod (installed pics)
thanks for the correction jmd ;-)
I didn't even take notice to be honest... |
All times are GMT -5. The time now is 12:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands