any tips on repacking D&D carbon fiber exhaust?

Reply Subscribe

Thread Tools

Search this Thread

07-21-2007, 08:49 PM

adam833

Member

Thread Starter

Join Date: Aug 2006

Posts: 80

Likes: 0

Received 0 Likes on 0 Posts

any tips on repacking D&D carbon fiber exhaust?

I drilled out the rivets and punched them all out. I cannot get the tube off for hrs..I tried banging the end cap with a rubber mallet etc no luck

Reply Like

07-21-2007, 11:04 PM

SupraJunky101

Join Date: May 2007

Posts: 22

Likes: 0

Received 0 Likes on 0 Posts

RE: any tips on repacking D&D carbon fiber exhaust?

It only goes one way. Hit the bottom flange with a rubber mallet It will come out, make sure they are drilled out all the way or it wont budge.

Hope that helps

Reply Like

07-22-2007, 03:23 AM

cbr_racin123

Join Date: Apr 2005

Location:

Posts: 428

Likes: 0

Received 0 Likes on 0 Posts

RE: any tips on repacking D&D carbon fiber exhaust?

Quote:

ORIGINAL: adam833

I drilled out the rivets and punched them all out. I cannot get the tube off for hrs..I tried banging the end cap with a rubber mallet etc no luck

The baffles on newer D&D cans are welded you can not pull them apart. Just cut the can down about a 1/4 inch. Pm me I can explain to you how to do it.

Reply Like