When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
repainted my bike and put back together today and now my light doesnt work. checked the wiring in the starter switch and fuses everything seems good but i have no power at the socket. any ideas?
Does the bike run and is the headlight the only component not working properly? If so, I would recheck the wires going into and out of the starter switch again. The solder joints in there are a classic F2 weak point.
i have fixed the switch problem before and the wire is still attached. and i have3 the bulb hard wired out of the fuse block right now so the bulb is good. those were my first 2 ideas too.