Does anyone have a MAP they'd like to share for an 03 954 with the following mods (street use and not Track): BCM race filter, slip-on (akra), no HTEV valve (removed), flapper removed and O2 eliminator.

Thanks
jim

 

get a custom tune.. most likely gain more HP/TQ and get better AIR/FUEL across the board.. only about 150-200 bucks

 

02 eliminator? I have heard of eliminating the second o2 sensor on ODBII cars with an emulator so you can eliminate the cat, but bikes only have one right? What do you gain by eliminating the sensor that tunes the fuel injection?

 

+100000 on that... bobjoe and I agree yet again on this... don't waste your time with a map that won't pull 100% of the power of your bike. you have too many mods to find someone who has your specific set up as it is. get a custom tune... it'll take 200 bucks max and you get your bike running 100% of its potential.

 

Demonchild,
Yep only one O2 on my 954. Eliminating the O2 is required by the P3 so it can manage the fuel cuz the O2 (eliminator) output is constant to the ECM.

The rest,
Yah I knowand will; BUT, if it pulls 95% it's better than a Dynojet standard map which is less than I'd say 80% cuz I've used them before. So how about help a brother out untilI have the green to get the real deal in a few months. Here in CA it's $250.00 and up for a proper tune from a reputable tuner.